Search results for '4mm Ball Bearing'

Save $30.00 when buying both as a combo deal: Strike ASM & ASM Ring Cap Multi-Optic Mount System Combo

SCOPE CAP MOUNT COMPATIBILITY: Only with Strike Industries Adjustable Scope Mount (ASM)

The Strike ASM Ring Cap Multi-Optic Mount System is a drop-in add-on for the SI Adjustable Scope Mount (ASM) that gives you almost endless mounting possibilities for just about all Mini/Micro Red Dot Sight (MRDS) footprints on the market or Picatinny rail for mounting IR devices, ranging equipment or any Picatinny based accessories. When you want to enhance your Strike Industries ASM by running a dual optic setup and have a close distance MRDS paired with a Low Power Variable Optic (LPVO) scope, this Strike ASM Ring Cap Mount is an accessory that does not force you to pick only one red dot you have to stick with forever. The included multi-optic plate or Picatinny rail can be mounted at 12 o'clock or 45-degree right or left positions to customize exactly for the specific user. With fitment for almost all MRDS’ on the market, the Strike ASM Ring Cap Multi-Optic Mount System gives you a simple and modular just about all-in-one solution to upgrade the functionality of the Strike Industries Adjustable Scope Mount (ASM).

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Strike ASM Ring Cap Mount screws

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

The Strike Dual Folding Adapter – Stock is a versatile and innovative patented system that offers unparalleled convenience and flexibility. With its intuitive folding mechanism, you can fold the adapter to either the left or right side without any flipping or reconfiguration, and the positive lock ensures it stays in place. Deployment is quick and effortless with just a simple pull up on the bar near the hinge. The 3-degree tilt angle helps prevent interference with your weapon's ejection port when folded to the right. This adapter fits directly onto a 1913 Picatinny interface with built-in locking lugs for secure attachment, and the included rear rubber buttpad ensures a comfortable shoulder weld for your rifle or SBR setup. Constructed with durable steel hinge and 6061-T6 Aluminum, the Strike Dual Folding Adapter - Stock is lightweight, yet tough. Plus, it's highly customizable with interchangeable parts like a cheek riser, different strut lengths, and other accessories (sold separately). Use it with most 1913 Picatinny rear ends, including the Strike AR Picatinny Stock Adapter, or any factory OEM weapon with a Picatinny rail. With the Strike Dual Folding Adapter – Stock, you get the ultimate modular folding adapter that weighs under 10 ounces.

RUBBER PAD NOTE:
-Watch this video: How do the rubber pads work? (click link here)
-Included rubber pads in various thicknesses are for the two (x2) indentations located inside the Dual Folding Adapter side that faces the bar. Unfold and insert the desired rubber pad thickness to adjust the desired locking tension when fully deployed.

Whether you get to work by jumping out of perfectly good aircraft, wading up a hostile beach or jammed in the back of minivan with 6 big sweaty dudes you want your gear to be ready but not in the way. RACKminus is half the weight of a loaded M4 magazine, half the thickness of a dime and over 4 times as durable as air textured nylon: the lightest, thinnest, strongest, simplest modular chest rig on the market. RACKminus is made from hydrophobic ULTRAcomp™ so it gains minimal weight when wet, dries in seconds, and resists fungal and bacterial growth so you chafe and stink less. Its MOLLEminus mesh lined shoulder straps are free breathing, MOLLE compatible and provide routing for communications wires, hydration tubes or antennas. Two 1 inch buckles placed 7.5" on center apart allow compatibility with Velocity, Mayflower, Crye, and First Spear profile armor carriers and with any MOLLE vest by using National Molding's Molle Tee Mounts (not included). RACKminus can also be mounted to most MOLLE armor carriers using two female repair buckles and two tee mounts.

The Strike Industries Bang Band Mini gives you the ability to add additional grip to a pistol grip, magazine or any small sized object. The grooves and anti-slip texture gives you better handling and feeling of your weapon. The positive tactical feeling enhances your pistol grip and/or magazine with an additional gripping surface for your dominant and/or support hand. The 34mm (1.34”) diameter by 14.7mm (0.58”) wide Strike Bang Band Mini is strong and durable for you to also use in other applications when a standard rubber band just is not enough. Made of Nitrile Butadiene Rubber (NBR), it withstands heat up to 226° F. SI is constantly developing new parts and accessories to be a total systems provider for every aspect of your weapon.

NOTES There is no cable management and not reversible like Strike Bang Band

WARNING: COLOR VERSIONS OF BANG BAND MINI (RED, FDE, OD) MAY CHANGE WHEN STRETCHED DUE TO ELASTIC MATERIAL

DISCLAIMER: Treat the Strike Bang Band like a traditional rubber band which can lose its elasticity over time as well as rip or tear. Not meant to be reusable for long periods of time.

NOTE:
-Pressing buttons simultaneously will remove bar from hinge
-Lubrication of hinge and button components needed for routine maintenance

Package Contents:
-x1 Strike Dual Folding Adapter (fully assembled with stabilizer)
-x1 Stock buttpad for rifle or registered Short-Barrel Rifle (SBR)
-x4 Rubber pad (various thickness) for Dual Folding Adapter indentation to adjust desired locking tension when fully deployed
-x1 Torx Tool [T25]
-x1 Warning card

Product Features:
-Preassembled as stabilizer and includes a separate stock rear piece for rifle or registered Short-Barrel Rifle (SBR)
-Patented first-in-market Picatinny dual folding adapter with intuitive unfolding system
-Folds left or right anytime without flipping or reconfiguring hinge
-Adds [Stabilizer] 9.24" (234.64mm) or [Stock] 9.18” (233.14mm) to overall weapon length
-Adds 1.02” (26.00mm) to overall weapon length in folded position
-Positive lock in the folded position, included rubber pads for folding adapter indentation to adjust desired locking tension when fully deployed
-Pull up on bar near hinge and back for quick deployment when folded
-3-degree down tilt to help prevent interference with ejection port when folded to right side
-Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs
-Single rear QD [Stabilizer] and ambidextrous QD sling mounting points [Stock]
-Rubber anti-slip buttpad [Stock]
-Steel hinge with 6061-T6 Aluminum base, adapter & strut
-Lightweight at under 10 ounces
-Modular system with interchangeable parts sold separately (strut, cheek riser, stabilizer & more)

(See additional compatibility list in PRODUCT SPEC tab)
MOUNT COMPATIBILITY: 1913 Picatinny