Search results for 'battleaxe stock'
-
Strike Dual Folding Adapter - Cheek Riser
The Strike Dual Folding Adapter – Cheek Riser is a drop-in direct mount optional cheek rest for the Strike Dual Folding Adapter bar. This gives you the ability to add an adjustable cheek rest for added comfort and accuracy with consistent cheek placement. This adjustable Cheek Riser gives you five (x5) position choices to pick the best use for each individual user; heights above top of bar: 10.25mm (0.40”) [low flat], 16.55mm (0.65”) [mid], 23.55mm (0.53”) [high flat], 20.46mm (0.81”) [low angled], 27.50mm (1.08”) [high angled]. Quickly swap heights with the triblade thumb screw designed for easy installation and removal without tools. Give yourself a good cheek weld and anchor point with the Strike Dual Folding Adapter – Cheek Riser for critical accuracy and consistency.
HEIGHTS ABOVE TOP OF BAR:
-LOW FLAT: 10.25mm (0.40”)
-MID: 16.55mm (0.65”)
-HIGH FLAT: 23.55mm (0.53”)
-LOW ANGLED: 20.46mm (0.81”)
-HIGH ANGLED: 27.50mm (1.08”)COMPATIBILITY: Only with Strike Dual Folding Stock Adapter bar
Learn More -
BACP - BATTLELINK™ ADJUSTABLE CHEEK PIECE
The Battlelink Adjustable Cheek Piece BACP is the solution to varying heights of mounted optics and proper eye alignment. When used in conjunction with the MFT Battlelink Stock series of collapsible stocks, the BACP easily and quickly adjusted to provide the user with optimal eye-to-optic focus and a strong cheek weld contact position. While minimizing muscle and eye strain, the BACP allows the full usage of the charging handle due to the built-in limiting stop that insures interference-free operation of the rifle.
Learn More -
MOD1 Rubber Buttpad
The Strike Industries Rubber Butt Pad is a drop in add on for the Mod1 Stock system. The lightweight, slim profile enhances control and usability of the stock without dramatically increasing weight or bulk. At only 0.36” in thickness, the butt pad doesn’t sacrifice the minimalist nature that the Strike stock is known for while at the same time its flexibility offers some level of recoil attenuation. The hybrid construction of impact resistant TPE integrated on a rigid polymer frame combines strength and resilience to provide the best of both worlds in creating the best possible shoulder weld.
Learn More -
Viper MOD-1 Stock
Strike Industries drop-in replacement buttstock for AR/15/M16 carbine using mil-spec sized receiver extension tubes. The Viper stock integrates features sought by military professionals and firearms enthusiasts around the world. Strike Industries came up with a lighter, compact buttstock, at an even more attractive price point. Learn More -
Dual Folding Stock and Brace
NOTE:
-Pressing buttons simultaneously will remove bar from hinge
-Lubrication of hinge and button components needed for routine maintenancePackage Contents:
-x1 Strike Dual Folding Adapter (fully assembled with stabilizer)
-x1 Stock buttpad for rifle or registered Short-Barrel Rifle (SBR)
-x4 Rubber pad (various thickness) for Dual Folding Adapter indentation to adjust desired locking tension when fully deployed
-x1 Torx Tool [T25]
-x1 Warning cardProduct Features:
-Preassembled as stabilizer and includes a separate stock rear piece for rifle or registered Short-Barrel Rifle (SBR)
-Patented first-in-market Picatinny dual folding adapter with intuitive unfolding system
-Folds left or right anytime without flipping or reconfiguring hinge
-Adds [Stabilizer] 9.24" (234.64mm) or [Stock] 9.18” (233.14mm) to overall weapon length
-Adds 1.02” (26.00mm) to overall weapon length in folded position
-Positive lock in the folded position, included rubber pads for folding adapter indentation to adjust desired locking tension when fully deployed
-Pull up on bar near hinge and back for quick deployment when folded
-3-degree down tilt to help prevent interference with ejection port when folded to right side
-Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs
-Single rear QD [Stabilizer] and ambidextrous QD sling mounting points [Stock]
-Rubber anti-slip buttpad [Stock]
-Steel hinge with 6061-T6 Aluminum base, adapter & strut
-Lightweight at under 10 ounces
-Modular system with interchangeable parts sold separately (strut, cheek riser, stabilizer & more)(See additional compatibility list in PRODUCT SPEC tab)
MOUNT COMPATIBILITY: 1913 Picatinny
Learn More -
Dual Folding Stock
The Strike Dual Folding Adapter – Stock is a versatile and innovative patented system that offers unparalleled convenience and flexibility. With its intuitive folding mechanism, you can fold the adapter to either the left or right side without any flipping or reconfiguration, and the positive lock ensures it stays in place. Deployment is quick and effortless with just a simple pull up on the bar near the hinge. The 3-degree tilt angle helps prevent interference with your weapon's ejection port when folded to the right. This adapter fits directly onto a 1913 Picatinny interface with built-in locking lugs for secure attachment, and the included rear rubber buttpad ensures a comfortable shoulder weld for your rifle or SBR setup. Constructed with durable steel hinge and 6061-T6 Aluminum, the Strike Dual Folding Adapter - Stock is lightweight, yet tough. Plus, it's highly customizable with interchangeable parts like a cheek riser, different strut lengths, and other accessories (sold separately). Use it with most 1913 Picatinny rear ends, including the Strike AR Picatinny Stock Adapter, or any factory OEM weapon with a Picatinny rail. With the Strike Dual Folding Adapter – Stock, you get the ultimate modular folding adapter that weighs under 10 ounces.
RUBBER PAD NOTE:
-Watch this video: How do the rubber pads work? (click link here)
-Included rubber pads in various thicknesses are for the two (x2) indentations located inside the Dual Folding Adapter side that faces the bar. Unfold and insert the desired rubber pad thickness to adjust the desired locking tension when fully deployed.
Learn More
