Search results for 'free float rail'

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Dual Folding Adapter – Stock is a versatile and innovative patented system that offers unparalleled convenience and flexibility. With its intuitive folding mechanism, you can fold the adapter to either the left or right side without any flipping or reconfiguration, and the positive lock ensures it stays in place. Deployment is quick and effortless with just a simple pull up on the bar near the hinge. The 3-degree tilt angle helps prevent interference with your weapon's ejection port when folded to the right. This adapter fits directly onto a 1913 Picatinny interface with built-in locking lugs for secure attachment, and the included rear rubber buttpad ensures a comfortable shoulder weld for your rifle or SBR setup. Constructed with durable steel hinge and 6061-T6 Aluminum, the Strike Dual Folding Adapter - Stock is lightweight, yet tough. Plus, it's highly customizable with interchangeable parts like a cheek riser, different strut lengths, and other accessories (sold separately). Use it with most 1913 Picatinny rear ends, including the Strike AR Picatinny Stock Adapter, or any factory OEM weapon with a Picatinny rail. With the Strike Dual Folding Adapter – Stock, you get the ultimate modular folding adapter that weighs under 10 ounces.

RUBBER PAD NOTE:
-Watch this video: How do the rubber pads work? (click link here)
-Included rubber pads in various thicknesses are for the two (x2) indentations located inside the Dual Folding Adapter side that faces the bar. Unfold and insert the desired rubber pad thickness to adjust the desired locking tension when fully deployed.

The Strike Industries Bikini Hand Stop (BHS) gives the shooter increased ergonomics and control of the weapon. The hand stop is made from durable and lightweight polymer compatible with M-LOK rails. The BHS is bi-directional and can be mounted in either direction and includes two (2) per pack. The low-profile design with all rounded corners or smooth edges help to avoid snags. The SI Bikini Hand Stop gives the shooter a quick indexing point for faster weapon deployment which can be used in a "push" or "pull" style grip. You can mount the hand stop more forward on the handguard as it's also designed to go in between your index and middle fingers. The more forward position on the handguard can help get the BHS out of the way when in a kneeling or prone position as well as other accessories and equipment. Also you can mount at 3 or 9 o'clock positions to use as a thumb ledge for applying downward pressure to mitigate recoil. Getting its name from the obvious sexy shape, the Strike Industries Bikini Hand Stop rail attachment gives you increased accuracy and stability at a super budget friendly price while barely adding any weight.

COMPATIBILITY: M-LOK

DISCLAIMER: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Industries Ambush low profile sling loop is the lowest profile sling loop designed for the MIL-STD-1913 rail. Made of solid steel, its unique locking bar design system allows for it to be lightweight and durable. Because the Ambush sits flat in between the rails, it will not interfere with your sights and fit neatly under longer optics when mounted towards the middle of the rifle. The dual purpose loop and swivel sling attachments allow the user to choose which mount they would like to use.

(QDSS not included)

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screws

WARNING:
-Before every use, always check proper function of your QD mount and/or sling loop and any wear and tear from use
-Always have your weapon in the SAFE position when not being fired
-Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy

The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with.