Search results for 'HandguArd'

The Strike Handguard for KRISS Vector SDP adds more functionality and usability to the Vector platform with M-LOK attachments. This handguard mounts quickly and directly to all KRISS Vector lower receivers but is specifically designed for the SDP model with a 6.5” barrel. Add enhanced ergonomics and manipulation of your weapon with SI style. Many M-LOK or SI LINK accessories can be attached and mounted along the handguard at 3, 6, and 9 o'clock positions giving you more options that will transform the function and the look of your Vector. This Strike Handguard fits suppressors up to 1.90” (48.26mm) in diameter and is also designed to work with Vector CRB square or round barrel shrouds. Machined from 6061-T6 aluminum, this 1-pc free float handguard is designed to minimize weight and increase strength. The Strike Handguard for KRISS Vector SDP will complete the look and add functionality with a simple drop-in installation choice when it comes to enhancing and customizing your KRISS Vector in a limited aftermarket marketplace.

COMPATIBILITY:
-Fits suppressors up to 1.90” (48.26mm) in diameter
-Vector SDP/SBR w/ 6.5” barrel models
-Vector SDP/SBR w/ 5.5” barrel models using linear compensator, silencer or muzzle device with all ports past front of Strike handguard
-Vector CRB
-Vector 22 CRB
-Vector square or round barrel shrouds
NOT COMPATIBLE: Vector SDP/SBR w/ 5.5” barrel models when used with only barrel and no muzzle devices with ports past front of Strike handguard, linear compensator or silencer past front of Strike handguard.

WARNING: Specifically designed for the KRISS Vector SDP with 6.5” barrel models but will work with 5.5” barrel models using linear compensator, silencer or muzzle device with all ports past handguard for safe use. Designed to work with KRISS Vector SDP with 5.5” barrel models for the tuck look paired with a linear compensator, silencer or muzzle device with all ports past front of Strike handguard.

The Strike Industries LINK Cover adds a positive tactile feeling and utilizes our patented LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. Designed to be low-profile and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, rail covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands. Included are 5-pcs per pack to easily configure the Strike Industries LINK Cover to customize your specific comfort and desired setup.

COMPATIBILITY: M-LOK and KeyMod

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

The Strike Gear® Cable Management System® Sleeve offers a way for you to attach your switch or pressure pad and secure wires alongside the handguard of your weapon. Just like the rest of the SI Cable Management System® (CMS) line of products, keep your gear organized and personalized for each user. The SI CMS Sleeve is made of two polyester (x2) elastic webbing loops, the main loop sized 145mm (5.71”) in diameter to stretch over your handguard and smaller loop sized 8mm (0.32”) height x 21mm (083”) base width for a switch/pressure pad. If you do not have a mount or desire your switch/pressure pad to be in a specific place, the CMS Sleeve has a small elastic loop for you to secure and place almost exactly where you want it. The small loop has been sized to fit majority of the switches/pressure pads on the market. The main loop is sized to fit SI handguards and just about any handguard on the market. Both the main and small loop allow you to organize, tuck or run loose wire. No messy wires. Add a little protection against sharp rail slot edges. The Strike Gear® Cable Management System® Sleeve gives a customized way to attach a switch or pressure pad and manage your cables in a cost-effective way. Developed to continue the line of Strike Gear® soft goods accessories to help you organize.

COMPATIBILITY:
-Main loop: 145mm (5.71") in diameter with a ±3.0-5.0mm (±0.12-0.20") stretch
-Small loop: 8mm (0.32”) height x 21mm (083”) base width with a ±3.0-5.0mm (±0.12-0.20") stretch

WARNING AND DISCLAIMER: TO PREVENT HARM OR INJURY, THIS FABRIC MAY MELT IF HANDGUARD/RAIL AND/OR WEAPON IS OVERHEATED. USE WITH CAUTION.

Pyramid angled RIS adapter. Use the vertical grip of your choice and put it into a 17 degree angle for enhanced ergonomics. Why buy an additional grip when you already have one? Angle it forward to simulate the Romanian AK handguard or angle it back to add a 2nd front pistol grip similar to a Mk43. When installed back the grip is angled 17 degrees and the same as an AR15 grip. Combine it with our Dura grip in CQB configuration for the ultimate angled vertical grip. 

The Strike Industries Angled Quick Detach (AQD) for CZ Scorpion EVO allows for proper sling attachment to a QD socket that directly replaces the factory CZ swivel sling mount. Designed to fit into the dovetail cuts located on the barrel trunnion, the AQD is ambidextrous and can be used on either side of the CZ Scorpion. Move the handguard forward enough to slide the factory mount off and simply slide the AQD into the dovetail for an easy installation. Angled at 115 degrees which allows for easier ergonomic placement and accessibility. The QD is a 360° free swivel socket that is made from lightweight 6061-T6 aluminum and is bead blasted hard anodized. The Strike Industries Angled Quick Detach for CZ Scorpion EVO assists in pairing your QD sling in a harmonious position against your body or secures the sling as a shooting aid.

COMPATIBILITY: all CZ Scorpion EVO except Micro w/ Folding Brace
NOT COMPATIBLE: CZ Scorpion EVO Micro w/ Folding Brace

**[AQD] CLEARANCE/SALE ITEMS ARE FINAL SALE. STRIKE INDUSTRIES WILL ONLY REVIEW AND OFFER WARRANTY REPLACEMENTS FROM MANUFACTURER DEFECTS.**