Search results for 'Kel tec'

NTOA Approved
The Dura Grip series vertical grip. Our Dura Grip line of vertical grips are all CNC machined aluminum and designed to last. For those that seek a bit more from their accessories the metal design is built to take some serious punishment right down to the steel mounting screw. The Handy version is our bare bones version for those of you that need the extra bells and whistles. Not everyone runs optics or flashlights and we had you in mind when designing our Handy version. Dura Grip Handy version gives you unsurpassed ergonomics with increased surface area with lighter weight. Our Dura Grip line also are convertible from full size to CQB configurations in just seconds. The Dura Grip Handy is water-resistant (not water-proof) Have other battery dependent accessories? Our Dura Grip line accommodate up to 3 123A batteries. The bottom cap has soft lining in order to keep batteries safe and protected.

Learn More

The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control.

COMPATIBILITY: M-LOK and KeyMod

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

DISCLAIMER: Always check with your state and local laws. We are not lawyers.

Learn More

The Back Up Polymer Flip up Front Sight with standard iron sight elevation adjustment (BUPSWF) mounts onto a 1913 Picatinny rail and accepts any standard front post blade. A standard front sight tool is required with each click equaling the standard 1/4 MOA. Unlike other backup sights, MFT has developed a shroud that shelters the front post blade from debris and impact damage when not deployed. A slim profile allows the sight to sit under most optics. Manufactured using a specially developed Military Grade reinforced, super tough polyamide, MADE IN THE USA. Learn More

The Strike Multidirectional Picatinny Rail Cover with Cable Management utilizes the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories while adding a positive tactile feeling. Also protect your Pic rail from damage and protect your hand or thumb from sharp Pic rail edges. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, this simple and cost-effective solution for messy wires gives you a way to route and/or contain loose wire up to 3.5mm (0.14”) diameter inside the cover cavity. Cables can be routed alongside the Pic rail, alongside, U-shape, Z-shape or across to the other side. Designed to be a low-profile (9.43mm (0.37”) height) and used in any orientation, this cover protects your hand or thumb and has a textured surface which gives the shooter more control while handling or firing of the weapon. Made of durable and lightweight SI PolyFlex material, the cover only uses two (x2) Pic rail sections making it a compact and quick upgrade for the shooters hands while organizing and routing cables just about any way you want on a Pic rail. Available in a 6-pack, the Strike Multidirectional Picatinny Rail Cover with Cable Management will accessorize multiple Picatinny rails or weapons to not only add more weapon control but look good with wire management that is a quick installation and removal.

COMPATIBILITY: 1913 Picatinny

WARNING: 90-degree cable route will damage most wires because of sharp Picatinny rail edges

Learn More

Madbull has imported the AKRR2 from the innovative Strike Industries! Finally, now there’s a light-weight solution to optic mounting on an AK. The AKRR2 will transition over from real steel on to certain airsoft rifles. The S.I. AKRR2 is designed with three major components; Main base, 45 degree side rail, and extended rail. The main base serves as the attachment point to the rifle, a reference aiming gap, and base for mounting the side rail and extended rail. It has three hex socket screws to adjust the angle of the base. The 45 degree side Picatinny rail can be positioned ambidextrously and is best suited to pair with a micro red dot sight. The extended Picatinny rail can be used for EO tech or Aimpoint reflex sights and some long range magnified scopes. The AKRR2 major appeal is its level of adaptability. Whatever the shooter’s needs may be, the AKRR2 is designed to meet every challenge.

Learn More