Search results for 'buffer tube'

Keep the look of your existing stock and buffer tube but be able to convert it to fixed! The Stock Stop is the most affordable, easiest, and quickest way to convert your collapsible stock into a fixed stock. The Stock Stop fills in all but one receiver extension hole. This ensures that the stock cannot be adjusted to another position.  Compatible with any aftermarket 6-position buffer tube or our 7-position Advanced Receiver Extensions, the Stock Stop requires no modification to the buffer tube-- simply cut the piece to fit, and it drops right in. No need to drill and pin your existing stock. Made out of high strength and abrasion resistant TPU, the stop is ensured to stay in place, and out of sight.

COMPATIBILITY: Mil-Spec 6 position stocks with the positions evenly spaced apart.

DISCLAIMER: This device is made to conform to the DOJ criteria but has not been approved.  If the Stock Block is used in conjunction with other features on the CA DOJ banned features list, the host system no longer constitutes a “featureless” build.  Please consult your local laws and regulations to ensure compliance.

Learn More

NOTE:
-Pressing buttons simultaneously will remove bar from hinge
-Lubrication of hinge and button components needed for routine maintenance

Package Contents:
-x1 Strike Dual Folding Adapter (fully assembled with stabilizer)
-x1 Stock buttpad for rifle or registered Short-Barrel Rifle (SBR)
-x4 Rubber pad (various thickness) for Dual Folding Adapter indentation to adjust desired locking tension when fully deployed
-x1 Torx Tool [T25]
-x1 Warning card

Product Features:
-Preassembled as stabilizer and includes a separate stock rear piece for rifle or registered Short-Barrel Rifle (SBR)
-Patented first-in-market Picatinny dual folding adapter with intuitive unfolding system
-Folds left or right anytime without flipping or reconfiguring hinge
-Adds [Stabilizer] 9.24" (234.64mm) or [Stock] 9.18” (233.14mm) to overall weapon length
-Adds 1.02” (26.00mm) to overall weapon length in folded position
-Positive lock in the folded position, included rubber pads for folding adapter indentation to adjust desired locking tension when fully deployed
-Pull up on bar near hinge and back for quick deployment when folded
-3-degree down tilt to help prevent interference with ejection port when folded to right side
-Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs
-Single rear QD [Stabilizer] and ambidextrous QD sling mounting points [Stock]
-Rubber anti-slip buttpad [Stock]
-Steel hinge with 6061-T6 Aluminum base, adapter & strut
-Lightweight at under 10 ounces
-Modular system with interchangeable parts sold separately (strut, cheek riser, stabilizer & more)

(See additional compatibility list in PRODUCT SPEC tab)
MOUNT COMPATIBILITY: 1913 Picatinny

 

Learn More

The Strike Industries Adjustable Scope Mount (ASM) combines different eye relief options into one scope mount. The ASM can be set to one of four (4) Standard, Extended, Intermediate Extended and Hyper Extended positions. The ASM is CNC machined from 7250 aluminum and hard anodized in black. 7250 aluminum excels in applications requiring lightweight and high strength. Intended for use with Picatinny rail section rifles. The versatility of the Strike Industries Adjustable Scope Mount allows users to adjust the scope away from the shooter and also closer to the shooter when mounted in reverse for a hunting rifle setups, creating flexibility for various eye relief and scope positions.

COMPATIBILITY: 30mm Tube

Learn More

Save $30.00 when buying both as a combo deal: Strike ASM & ASM Ring Cap Multi-Optic Mount System Combo

SCOPE CAP MOUNT COMPATIBILITY: Only with Strike Industries Adjustable Scope Mount (ASM)

The Strike ASM Ring Cap Multi-Optic Mount System is a drop-in add-on for the SI Adjustable Scope Mount (ASM) that gives you almost endless mounting possibilities for just about all Mini/Micro Red Dot Sight (MRDS) footprints on the market or Picatinny rail for mounting IR devices, ranging equipment or any Picatinny based accessories. When you want to enhance your Strike Industries ASM by running a dual optic setup and have a close distance MRDS paired with a Low Power Variable Optic (LPVO) scope, this Strike ASM Ring Cap Mount is an accessory that does not force you to pick only one red dot you have to stick with forever. The included multi-optic plate or Picatinny rail can be mounted at 12 o'clock or 45-degree right or left positions to customize exactly for the specific user. With fitment for almost all MRDS’ on the market, the Strike ASM Ring Cap Multi-Optic Mount System gives you a simple and modular just about all-in-one solution to upgrade the functionality of the Strike Industries Adjustable Scope Mount (ASM).

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Strike ASM Ring Cap Mount screws

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

Learn More

Strike Industries drop-in replacement buttstock for AR/15/M16 carbine using mil-spec sized receiver extension tubes. The Viper stock integrates features sought by military professionals and firearms enthusiasts around the world. Strike Industries came up with a lighter, compact buttstock, at an even more attractive price point. Learn More