Search results for 'butt stocks and extender'

The Dura Grip series vertical grip. Our Dura Grip line of vertical grips are all CNC machined aluminum and designed to last. For those that seek a bit more from their accessories the metal design is built to take some serious punishment right down to the steel mounting screw. The PRO version features 2 switch pockets and accommodate a wide variety of pressure pad switches. If you have a flashlight, PEQ box, laser, or any other accessory that is dependent on a pressure switch then our PRO Dura Grip is perfect. With our built-in finger grooves and contour grooves the Dura Grip PRO gives you unsurpassed ergonomics with increased surface area with lighter weight. Our Dura Grip line also are convertible from full size to CQB configurations in just seconds. Both end caps are sealed with o-rings and are waterproof. Have optics, flashlights? Our Dura Grip line accommodate up to 3 123A batteries. Roof of the grip features a spring and the bottom cap has soft lining in order to keep the batteries safe and from discharging.

Keep the look of your existing stock and buffer tube but be able to convert it to fixed! The Stock Stop is the most affordable, easiest, and quickest way to convert your collapsible stock into a fixed stock. The Stock Stop fills in all but one receiver extension hole. This ensures that the stock cannot be adjusted to another position.  Compatible with any aftermarket 6-position buffer tube or our 7-position Advanced Receiver Extensions, the Stock Stop requires no modification to the buffer tube-- simply cut the piece to fit, and it drops right in. No need to drill and pin your existing stock. Made out of high strength and abrasion resistant TPU, the stop is ensured to stay in place, and out of sight.

COMPATIBILITY: Mil-Spec 6 position stocks with the positions evenly spaced apart.

DISCLAIMER: This device is made to conform to the DOJ criteria but has not been approved.  If the Stock Block is used in conjunction with other features on the CA DOJ banned features list, the host system no longer constitutes a “featureless” build.  Please consult your local laws and regulations to ensure compliance.

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Mini HandStop with Cable Management System® – a compact sized accessory for enhanced firearm control and wire organization. This lightweight, high-strength impact resistant handstop features the patent-pending SI Cable Management System® (CMS), offering versatile cable routing options, such as alongside, across, 90-degrees, U-shape or Z-shape, and excess wire storage for a clutter-free shooting experience. Designed for single M-LOK slot attachment with a compact 1.70" (43.18mm) overall length, the Strike Mini HandStop provides a rearward angle pull style grip option for superior weapon manipulation control. The textured front and rear finger areas ensure a secure grasp, while the built-in front and rear barricade stops provide additional stability. Made from the custom blended SI Polymer Extreme material, this handstop guarantees durability and performance under the most demanding conditions. Upgrade your firearm with the Strike Mini HandStop with Cable Management System® and experience the difference in control and organization.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws