Search results for 'HandguArd'

The Strike Handguard for KRISS Vector SDP adds more functionality and usability to the Vector platform with M-LOK attachments. This handguard mounts quickly and directly to all KRISS Vector lower receivers but is specifically designed for the SDP model with a 6.5” barrel. Add enhanced ergonomics and manipulation of your weapon with SI style. Many M-LOK or SI LINK accessories can be attached and mounted along the handguard at 3, 6, and 9 o'clock positions giving you more options that will transform the function and the look of your Vector. This Strike Handguard fits suppressors up to 1.90” (48.26mm) in diameter and is also designed to work with Vector CRB square or round barrel shrouds. Machined from 6061-T6 aluminum, this 1-pc free float handguard is designed to minimize weight and increase strength. The Strike Handguard for KRISS Vector SDP will complete the look and add functionality with a simple drop-in installation choice when it comes to enhancing and customizing your KRISS Vector in a limited aftermarket marketplace.

COMPATIBILITY:
-Fits suppressors up to 1.90” (48.26mm) in diameter
-Vector SDP/SBR w/ 6.5” barrel models
-Vector SDP/SBR w/ 5.5” barrel models using linear compensator, silencer or muzzle device with all ports past front of Strike handguard
-Vector CRB
-Vector 22 CRB
-Vector square or round barrel shrouds
NOT COMPATIBLE: Vector SDP/SBR w/ 5.5” barrel models when used with only barrel and no muzzle devices with ports past front of Strike handguard, linear compensator or silencer past front of Strike handguard.

WARNING: Specifically designed for the KRISS Vector SDP with 6.5” barrel models but will work with 5.5” barrel models using linear compensator, silencer or muzzle device with all ports past handguard for safe use. Designed to work with KRISS Vector SDP with 5.5” barrel models for the tuck look paired with a linear compensator, silencer or muzzle device with all ports past front of Strike handguard.

Learn More

The Strike Industries carbine length VIPER Handguard is a great upgrade to those looking for a solid, slim bottom drop-in handguard with aggressive styling!!! The VIPER Handguard, made of impact resistant nylon fiber-reinforced injection-molded polymer, features aggressive gripping options, top and bottom hand stops and the new M-Lok rail system with plenty of rail estate to mount your accessories! Learn More

The Strike Gear® Cable Management System® Sleeve offers a way for you to attach your switch or pressure pad and secure wires alongside the handguard of your weapon. Just like the rest of the SI Cable Management System® (CMS) line of products, keep your gear organized and personalized for each user. The SI CMS Sleeve is made of two polyester (x2) elastic webbing loops, the main loop sized 145mm (5.71”) in diameter to stretch over your handguard and smaller loop sized 8mm (0.32”) height x 21mm (083”) base width for a switch/pressure pad. If you do not have a mount or desire your switch/pressure pad to be in a specific place, the CMS Sleeve has a small elastic loop for you to secure and place almost exactly where you want it. The small loop has been sized to fit majority of the switches/pressure pads on the market. The main loop is sized to fit SI handguards and just about any handguard on the market. Both the main and small loop allow you to organize, tuck or run loose wire. No messy wires. Add a little protection against sharp rail slot edges. The Strike Gear® Cable Management System® Sleeve gives a customized way to attach a switch or pressure pad and manage your cables in a cost-effective way. Developed to continue the line of Strike Gear® soft goods accessories to help you organize.

COMPATIBILITY:
-Main loop: 145mm (5.71") in diameter with a ±3.0-5.0mm (±0.12-0.20") stretch
-Small loop: 8mm (0.32”) height x 21mm (083”) base width with a ±3.0-5.0mm (±0.12-0.20") stretch

WARNING AND DISCLAIMER: TO PREVENT HARM OR INJURY, THIS FABRIC MAY MELT IF HANDGUARD/RAIL AND/OR WEAPON IS OVERHEATED. USE WITH CAUTION.

Learn More

The Strike Industries carbine length Handguard is a great upgrade to those looking for a solid, slim bottom drop-in handguard with aggressive styling!!! The Handguard, made of impact resistant nylon fiber-reinforced injection-molded polymer, features aggressive gripping options, top and bottom hand stops and the new M-Lok rail system with plenty of real estate to mount your accessories!

Learn More

The Strike Bang Band secures weapon light/laser cables to help organize your gear while adding an anti-slip surface on your handguard. You can flip the Strike Bang Band so the cable channel guide can be used on the outside or the inside making it reversible and adaptable for your specific setup and needs. The cable channel fits into M-LOK compatible slots so you can keep your handguard as slim and sleek as possible. The grooves and anti-slip texture is on both sides of the band so you don’t have to pick which is the best surface. The positive tactical feeling enhances your handguard and/or magazine with an additional gripping surface for your support hand. Organize your cables with some SI style. The 2” diameter by 0.60” wide Strike Bang Band is strong and durable for you to also use in other applications when a standard rubber band just is not enough. Use the Strike Bang Band to add more tension to your buttstock latch or S rolling sling to keep it out of the way for vehicle use or neat storage in safe. Made of Nitrile Butadiene Rubber (NBR), it withstands heat up to 226° F. The Strike Bang Band is part of the growing line of Strike Industries Cable Management System® products that offers alternatives in cable organization and management. SI is constantly developing new parts and accessories to be a total systems provider for every aspect of your weapon.

DISCLAIMER: Treat the Strike Bang Band like a traditional rubber band which can lose its elasticity over time as well as rip or tear. Not meant to be reusable for long periods of time.

Learn More