Search results for 'body cnc'

The Strike Stacked Angled Grip with Cable Management System® is a modular rail attachment that allows the user to adjust the preferred length when paired with the optional Strike Stacked Angled Grip Extension (sold separately). With the stackable Extension pieces, the shooter can apply different grip techniques to adapt to various scenarios or sized hands. The grip angle sits on the handguard at 86 degrees and is compatible with M-LOK slots. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, 90-degrees or in a U-shape. Designed with textured palm and finger areas with flat sides for better weapon manipulation control. The Strike Stacked Angled Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material attachment that gives the user modular (with optional Extension) adjustable length grip options for better weapon manipulation control.

COMPATIBILITY: M-LOK

WARNING: Strike Stacked Angled Grip end plate needs to be expanded to remove from Strike Stacked Angled Grip body but be careful not to expand too far in which it can snap and break.

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

DISCLAIMER: Always check with your state and local laws. We are not lawyers.

The Strike Stacked Angled Grip with Cable Management System® is a modular rail attachment that allows the user to adjust the preferred length when paired with the optional Strike Stacked Angled Grip Extension (sold separately). With the stackable Extension pieces, the shooter can apply different grip techniques to adapt to various scenarios or sized hands. The grip angle sits on the handguard at 86 degrees and is compatible with M-LOK slots. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, 90-degrees or in a U-shape. Designed with textured palm and finger areas with flat sides for better weapon manipulation control. The Strike Stacked Angled Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material attachment that gives the user modular (with optional Extension) adjustable length grip options for better weapon manipulation control.

COMPATIBILITY: M-LOK

WARNING: Strike Stacked Angled Grip end plate needs to be expanded to remove from Strike Stacked Angled Grip body but be careful not to expand too far in which it can snap and break.

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

DISCLAIMER: Always check with your state and local laws. We are not lawyers.

The Tactical Sling Catch has been designed with the input of Special Force Group operators to eliminate a problem that nearly ALL weapon slings share. This is the chaffing of the neck from the webbing material use in their construction. While some maybe less abrasive than others, such as tubular webbing and softer material than thicker canvas materials, all will cause irritation and chaffing over a short period of time. This known issue is magnified when wearing any sort of body armor or outer tactical vest (OTV). The Tactical Sling Catch addresses the issue by keeping the webbing material away from the operators neck. It is attached and secured to the shoulder pad/strap of the vest by means of a heavy duty Velcro strap. The low profile design allows quick don and doff of the weapon sling while being virtually snag free when moving through heavy brush. 

The Strike Industries Angled Quick Detach (AQD) for CZ Scorpion EVO allows for proper sling attachment to a QD socket that directly replaces the factory CZ swivel sling mount. Designed to fit into the dovetail cuts located on the barrel trunnion, the AQD is ambidextrous and can be used on either side of the CZ Scorpion. Move the handguard forward enough to slide the factory mount off and simply slide the AQD into the dovetail for an easy installation. Angled at 115 degrees which allows for easier ergonomic placement and accessibility. The QD is a 360° free swivel socket that is made from lightweight 6061-T6 aluminum and is bead blasted hard anodized. The Strike Industries Angled Quick Detach for CZ Scorpion EVO assists in pairing your QD sling in a harmonious position against your body or secures the sling as a shooting aid.

COMPATIBILITY: all CZ Scorpion EVO except Micro w/ Folding Brace
NOT COMPATIBLE: CZ Scorpion EVO Micro w/ Folding Brace

**[AQD] CLEARANCE/SALE ITEMS ARE FINAL SALE. STRIKE INDUSTRIES WILL ONLY REVIEW AND OFFER WARRANTY REPLACEMENTS FROM MANUFACTURER DEFECTS.**

The Strike Industries Angled Quick Detach (AQD) and Flat Quick Detach (FQD) for CZ Scorpion EVO allows for proper sling attachment to a QD socket that directly replaces the factory CZ swivel sling mount. Designed to fit into the dovetail cuts located on the barrel trunnion, the AQD/FQD is ambidextrous and can be used on either side of the CZ Scorpion. Move the handguard forward enough to slide the factory mount off and simply slide the AQD/FQD into the dovetail for an easy installation. Angled at 115 degrees (AQD) which allows for easier ergonomic placement and accessibility. The QD is a 360° free swivel socket that is made from lightweight 6061-T6 aluminum and is bead blasted hard anodized. The Strike Industries Angled/Flat Quick Detach for CZ Scorpion EVO assists in pairing your QD sling in a harmonious position against your body or secures the sling as a shooting aid.

COMPATIBILITY: all CZ Scorpion EVO except Micro w/ Folding Brace
NOT COMPATIBLE: CZ Scorpion EVO Micro w/ Folding Brace

WARNING:
-Before every use, always check proper function of your QD mount and any wear and tear from use
-Always have your weapon in the SAFE position when not being fired
-Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy