WELCOME TO MADBULL !

Search results for 'rail'

Items 7 to 12 of 32 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction
  1. SIEGEN Rail Covers - Black (5-pack)

    SIEGEN Rail Covers - Black (5-pack)

    The Strike Industries SIEGEN Rail Cover adds an innovative way to upgrade your favorite rail/handguard with proper weapon light/laser cable management while providing a positive tactile feeling for M-LOK compatible slots. Rail covers are a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands. Made of NBR 1052 rubber, it withstands heat up to 320° F. While comfort and protection from heat and sharp edges are already important features, incorporating a cavity that runs parallel to the barrel which was intently designed to manage and protect various accessory wires was one of the main focuses of the SI SIEGEN Rail Cover. Take the existing rail covers SI already offers and introduce additional functionality. No wires to cover yet? Don't worry, the SIEGEN rail cover includes cavity inserts which act as a robust placeholder for when you are ready for cables to manage. Need to modify your setup for a certain situation? Easily move these rail cover as you are not limited to a set position or configuration. Push them into the M-LOK slots and you are ready to go in seconds. It's that easy. Get organized with the Strike Industries SIEGEN Rail Cover and ditch the cable ties or electrical tape.

    COMPATIBILITY: M-LOK

    NOTE: SIEGEN Cover will stay in M-LOK slot without wire cavity insert, but will most likely fall out during shooting/weapon manipulation.

    Learn More
  2. Link Rail Section 7 Slots-QD featured - Patent Pending - Black

    Link Rail Section 7 Slots-QD featured - Patent Pending - Black

    Strike Industries LINK attachment system takes the age old question Key-Mod vs. M-Lok and came up with the ultimate solution, a dual interface design compatible with both M-Lok and Key-Mod, same hardware with no need for additional parts. This Aluminum rail section allows the attachment of various M1913 Picatinny spec rail-mounted accessories such as vertical grips, lights, lasers,  etc. The Dual interface rail section also features beveled ends to reduce snagging and eliminate sharp corners and edges.  

    Learn More
  3. Strike Industries AK Rear Sight Rail Mount

    Strike Industries AK Rear Sight Rail Mount

    Madbull has imported the AKRR from the innovative Strike Industries! Finally, now there’s a light-weight solution to optic mounting on an AK. The AKRR transitions from real steel over onto certain models of airsoft rifles. The AKRR is a quick, easy was to install a Picatinny rail on your AK for optic mounting. The rail also has rear sight gap for reference aiming. The rail is great for low profile red dot scopes. It’s constructed out of hard coat anodize 6061 aircraft aluminum and can be adjusted up or down with the adjustment screws. It’s fast, simple, and effective way to get an optic on your AK today!

    Learn More
  4. Strike ASM Ring Cap Multi-Optic Mount System

    Strike ASM Ring Cap Multi-Optic Mount System

    Save $30.00 when buying both as a combo deal: Strike ASM & ASM Ring Cap Multi-Optic Mount System Combo

    SCOPE CAP MOUNT COMPATIBILITY: Only with Strike Industries Adjustable Scope Mount (ASM)

    The Strike ASM Ring Cap Multi-Optic Mount System is a drop-in add-on for the SI Adjustable Scope Mount (ASM) that gives you almost endless mounting possibilities for just about all Mini/Micro Red Dot Sight (MRDS) footprints on the market or Picatinny rail for mounting IR devices, ranging equipment or any Picatinny based accessories. When you want to enhance your Strike Industries ASM by running a dual optic setup and have a close distance MRDS paired with a Low Power Variable Optic (LPVO) scope, this Strike ASM Ring Cap Mount is an accessory that does not force you to pick only one red dot you have to stick with forever. The included multi-optic plate or Picatinny rail can be mounted at 12 o'clock or 45-degree right or left positions to customize exactly for the specific user. With fitment for almost all MRDS’ on the market, the Strike ASM Ring Cap Multi-Optic Mount System gives you a simple and modular just about all-in-one solution to upgrade the functionality of the Strike Industries Adjustable Scope Mount (ASM).

    (See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
    RED DOT COMPATIBILITY:
    -C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
    -SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
    NOT COMPATIBLE:
    -SIG SAUER ROMEO1, ROMEO1PRO

    Torque: Do not exceed 15 in/lbs (1.69 nM) for the Strike ASM Ring Cap Mount screws

    WARNING:
    -When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
    -Be careful and use your best judgment on which hardware to use for your specific setup
    -All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

    Learn More
  5. Strike Ambush 45-Degree Optic Mount

    Strike Ambush 45-Degree Optic Mount

    The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. The 45-degree angle should get you out of the way of most LPVO scopes along with two mounting positions to pick from on the SI Multi-Optic Mount side. Easily place a MRDS alongside a LPVO with the low-profile SI-Ambush Picatinny rail mount that either sits flush with the top of the Pic rail or slightly below making it easier to sit under a scope or scope mount. The Strike Ambush 45 comes with a dual footprint mounting plate which has the SI Multi-Optic Mount on one side and the Aimpoint® Micro Standard footprint for T-1/T-2 compatible red dots on the other side making this a new innovative modular option for a diverse market. The SUS630 hardened stainless steel Picatinny rail mount is ambidextrous for either side. The 6061-T6 aluminum mounting plate can be flipped to select which MRDS but also oriented to work with the right or left side of the Pic rail. Fitment for one or fitment for almost all MRDS’ on the market, the Strike Ambush 45-Degree Optic Mount gives you a simple, compact and modular just about all-in-one solution.

    MOUNT COMPATIBILITY: 1913 Picatinny

    (See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
    RED DOT COMPATIBILITY:
    -Aimpoint Micro Standard
    -C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
    -SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
    *NOTE: Some specific red dots require screws provided by user listed in PRODUCT SPEC tab
    NOT COMPATIBLE:
    -SIG SAUER ROMEO1, ROMEO1PRO

    WARNING:
    -When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
    -Be careful and use your best judgment on which hardware to use for your specific setup
    -All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

    Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw

    Learn More
  6. Viper Carbine Length Handguard

    Viper Carbine Length Handguard

    The Strike Industries carbine length VIPER Handguard is a great upgrade to those looking for a solid, slim bottom drop-in handguard with aggressive styling!!! The VIPER Handguard, made of impact resistant nylon fiber-reinforced injection-molded polymer, features aggressive gripping options, top and bottom hand stops and the new M-Lok rail system with plenty of rail estate to mount your accessories! Learn More

Items 7 to 12 of 32 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction