Search results for 'Hop up'

The Strike Industries LINK Cover adds a positive tactile feeling and utilizes our patented LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. Designed to be low-profile and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, rail covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands. Included are 5-pcs per pack to easily configure the Strike Industries LINK Cover to customize your specific comfort and desired setup.

COMPATIBILITY: M-LOK and KeyMod

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Learn More

NOTE:
-Pressing buttons simultaneously will remove bar from hinge
-Lubrication of hinge and button components needed for routine maintenance

Package Contents:
-x1 Strike Dual Folding Adapter (fully assembled with stabilizer)
-x1 Stock buttpad for rifle or registered Short-Barrel Rifle (SBR)
-x4 Rubber pad (various thickness) for Dual Folding Adapter indentation to adjust desired locking tension when fully deployed
-x1 Torx Tool [T25]
-x1 Warning card

Product Features:
-Preassembled as stabilizer and includes a separate stock rear piece for rifle or registered Short-Barrel Rifle (SBR)
-Patented first-in-market Picatinny dual folding adapter with intuitive unfolding system
-Folds left or right anytime without flipping or reconfiguring hinge
-Adds [Stabilizer] 9.24" (234.64mm) or [Stock] 9.18” (233.14mm) to overall weapon length
-Adds 1.02” (26.00mm) to overall weapon length in folded position
-Positive lock in the folded position, included rubber pads for folding adapter indentation to adjust desired locking tension when fully deployed
-Pull up on bar near hinge and back for quick deployment when folded
-3-degree down tilt to help prevent interference with ejection port when folded to right side
-Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs
-Single rear QD [Stabilizer] and ambidextrous QD sling mounting points [Stock]
-Rubber anti-slip buttpad [Stock]
-Steel hinge with 6061-T6 Aluminum base, adapter & strut
-Lightweight at under 10 ounces
-Modular system with interchangeable parts sold separately (strut, cheek riser, stabilizer & more)

(See additional compatibility list in PRODUCT SPEC tab)
MOUNT COMPATIBILITY: 1913 Picatinny

 

Learn More

The Strike Industries Bikini Hand Stop (BHS) gives the shooter increased ergonomics and control of the weapon. The hand stop is made from durable and lightweight polymer compatible with M-LOK rails. The BHS is bi-directional and can be mounted in either direction and includes two (2) per pack. The low-profile design with all rounded corners or smooth edges help to avoid snags. The SI Bikini Hand Stop gives the shooter a quick indexing point for faster weapon deployment which can be used in a "push" or "pull" style grip. You can mount the hand stop more forward on the handguard as it's also designed to go in between your index and middle fingers. The more forward position on the handguard can help get the BHS out of the way when in a kneeling or prone position as well as other accessories and equipment. Also you can mount at 3 or 9 o'clock positions to use as a thumb ledge for applying downward pressure to mitigate recoil. Getting its name from the obvious sexy shape, the Strike Industries Bikini Hand Stop rail attachment gives you increased accuracy and stability at a super budget friendly price while barely adding any weight.

COMPATIBILITY: M-LOK

DISCLAIMER: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

Learn More

The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. The 45-degree angle should get you out of the way of most LPVO scopes along with two mounting positions to pick from on the SI Multi-Optic Mount side. Easily place a MRDS alongside a LPVO with the low-profile SI-Ambush Picatinny rail mount that either sits flush with the top of the Pic rail or slightly below making it easier to sit under a scope or scope mount. The Strike Ambush 45 comes with a dual footprint mounting plate which has the SI Multi-Optic Mount on one side and the Aimpoint® Micro Standard footprint for T-1/T-2 compatible red dots on the other side making this a new innovative modular option for a diverse market. The SUS630 hardened stainless steel Picatinny rail mount is ambidextrous for either side. The 6061-T6 aluminum mounting plate can be flipped to select which MRDS but also oriented to work with the right or left side of the Pic rail. Fitment for one or fitment for almost all MRDS’ on the market, the Strike Ambush 45-Degree Optic Mount gives you a simple, compact and modular just about all-in-one solution.

MOUNT COMPATIBILITY: 1913 Picatinny

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-Aimpoint Micro Standard
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
*NOTE: Some specific red dots require screws provided by user listed in PRODUCT SPEC tab
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw

Learn More

The Strike Industries Quick Detach Sling Loop is the most revolutionary design for QD attachments to date. With the ability to remove the QD with a single hand the user can easily squeeze the mechanism for the simplest attachment and detachment. Instead of a push button that is tough to disenage, the patent pending side to side mechanism allows for uniterrupted quick attach and detach while the sling is in use. Crafted from 17-4 Stainless Steel and after a quench polish quench process, the durability of the sling loop is greatly increased. The enhanced geometry of the sling loop allows the strap to never pinch, bite, or roll around the interior of the loop allowing for the maximum mobility and comfort in any tactical or training situation. Learn More