Search results for 'oss'

The Strike Mini HandStop with Cable Management System® – a compact sized accessory for enhanced firearm control and wire organization. This lightweight, high-strength impact resistant handstop features the patent-pending SI Cable Management System® (CMS), offering versatile cable routing options, such as alongside, across, 90-degrees, U-shape or Z-shape, and excess wire storage for a clutter-free shooting experience. Designed for single M-LOK slot attachment with a compact 1.70" (43.18mm) overall length, the Strike Mini HandStop provides a rearward angle pull style grip option for superior weapon manipulation control. The textured front and rear finger areas ensure a secure grasp, while the built-in front and rear barricade stops provide additional stability. Made from the custom blended SI Polymer Extreme material, this handstop guarantees durability and performance under the most demanding conditions. Upgrade your firearm with the Strike Mini HandStop with Cable Management System® and experience the difference in control and organization.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control.

COMPATIBILITY: M-LOK and KeyMod

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

DISCLAIMER: Always check with your state and local laws. We are not lawyers.

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Multidirectional Picatinny Rail Cover with Cable Management utilizes the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories while adding a positive tactile feeling. Also protect your Pic rail from damage and protect your hand or thumb from sharp Pic rail edges. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, this simple and cost-effective solution for messy wires gives you a way to route and/or contain loose wire up to 3.5mm (0.14”) diameter inside the cover cavity. Cables can be routed alongside the Pic rail, alongside, U-shape, Z-shape or across to the other side. Designed to be a low-profile (9.43mm (0.37”) height) and used in any orientation, this cover protects your hand or thumb and has a textured surface which gives the shooter more control while handling or firing of the weapon. Made of durable and lightweight SI PolyFlex material, the cover only uses two (x2) Pic rail sections making it a compact and quick upgrade for the shooters hands while organizing and routing cables just about any way you want on a Pic rail. Available in a 6-pack, the Strike Multidirectional Picatinny Rail Cover with Cable Management will accessorize multiple Picatinny rails or weapons to not only add more weapon control but look good with wire management that is a quick installation and removal.

COMPATIBILITY: 1913 Picatinny

WARNING: 90-degree cable route will damage most wires because of sharp Picatinny rail edges

NOTE:
-Pressing buttons simultaneously will remove bar from hinge
-Lubrication of hinge and button components needed for routine maintenance

Package Contents:
-x1 Strike Dual Folding Adapter (fully assembled with stabilizer)
-x1 Stock buttpad for rifle or registered Short-Barrel Rifle (SBR)
-x4 Rubber pad (various thickness) for Dual Folding Adapter indentation to adjust desired locking tension when fully deployed
-x1 Torx Tool [T25]
-x1 Warning card

Product Features:
-Preassembled as stabilizer and includes a separate stock rear piece for rifle or registered Short-Barrel Rifle (SBR)
-Patented first-in-market Picatinny dual folding adapter with intuitive unfolding system
-Folds left or right anytime without flipping or reconfiguring hinge
-Adds [Stabilizer] 9.24" (234.64mm) or [Stock] 9.18” (233.14mm) to overall weapon length
-Adds 1.02” (26.00mm) to overall weapon length in folded position
-Positive lock in the folded position, included rubber pads for folding adapter indentation to adjust desired locking tension when fully deployed
-Pull up on bar near hinge and back for quick deployment when folded
-3-degree down tilt to help prevent interference with ejection port when folded to right side
-Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs
-Single rear QD [Stabilizer] and ambidextrous QD sling mounting points [Stock]
-Rubber anti-slip buttpad [Stock]
-Steel hinge with 6061-T6 Aluminum base, adapter & strut
-Lightweight at under 10 ounces
-Modular system with interchangeable parts sold separately (strut, cheek riser, stabilizer & more)

(See additional compatibility list in PRODUCT SPEC tab)
MOUNT COMPATIBILITY: 1913 Picatinny