Search results for 'upper receiver'

The Strike Handguard for KRISS Vector SDP adds more functionality and usability to the Vector platform with M-LOK attachments. This handguard mounts quickly and directly to all KRISS Vector lower receivers but is specifically designed for the SDP model with a 6.5” barrel. Add enhanced ergonomics and manipulation of your weapon with SI style. Many M-LOK or SI LINK accessories can be attached and mounted along the handguard at 3, 6, and 9 o'clock positions giving you more options that will transform the function and the look of your Vector. This Strike Handguard fits suppressors up to 1.90” (48.26mm) in diameter and is also designed to work with Vector CRB square or round barrel shrouds. Machined from 6061-T6 aluminum, this 1-pc free float handguard is designed to minimize weight and increase strength. The Strike Handguard for KRISS Vector SDP will complete the look and add functionality with a simple drop-in installation choice when it comes to enhancing and customizing your KRISS Vector in a limited aftermarket marketplace.

COMPATIBILITY:
-Fits suppressors up to 1.90” (48.26mm) in diameter
-Vector SDP/SBR w/ 6.5” barrel models
-Vector SDP/SBR w/ 5.5” barrel models using linear compensator, silencer or muzzle device with all ports past front of Strike handguard
-Vector CRB
-Vector 22 CRB
-Vector square or round barrel shrouds
NOT COMPATIBLE: Vector SDP/SBR w/ 5.5” barrel models when used with only barrel and no muzzle devices with ports past front of Strike handguard, linear compensator or silencer past front of Strike handguard.

WARNING: Specifically designed for the KRISS Vector SDP with 6.5” barrel models but will work with 5.5” barrel models using linear compensator, silencer or muzzle device with all ports past handguard for safe use. Designed to work with KRISS Vector SDP with 5.5” barrel models for the tuck look paired with a linear compensator, silencer or muzzle device with all ports past front of Strike handguard.

Madbull has imported the AKRR2 from the innovative Strike Industries! Finally, now there’s a light-weight solution to optic mounting on an AK. The AKRR2 will transition over from real steel on to certain airsoft rifles. The S.I. AKRR2 is designed with three major components; Main base, 45 degree side rail, and extended rail. The main base serves as the attachment point to the rifle, a reference aiming gap, and base for mounting the side rail and extended rail. It has three hex socket screws to adjust the angle of the base. The 45 degree side Picatinny rail can be positioned ambidextrously and is best suited to pair with a micro red dot sight. The extended Picatinny rail can be used for EO tech or Aimpoint reflex sights and some long range magnified scopes. The AKRR2 major appeal is its level of adaptability. Whatever the shooter’s needs may be, the AKRR2 is designed to meet every challenge.

The Strike Industries Magwell for CZ Scorpion EVO is a flared design specifically for Scorpion EVO pistols and carbines to provide easier magazine insertion for fast reliable reloading while adding SI styling. The benefit of adding a funnel-like magwell to help prevent the dreaded reload bobble outweighs the added material of this lightweight SI Magwell. With the addition of an increased radial edge in front of receiver, this magwell aids in improving grip support for the offhand. This magwell is made of high-strength impact resistant custom blended SI Polymer Extreme material. Add consistency and cut fractions of seconds off your reloads now with the Strike Industries Magwell for CZ Scorpion EVO. A perfect pairing with the SI Mag Release For CZ Scorpion EVO.

COMPATIBILITY: All CZ Scorpion EVO models (except 3+)
NOT COMPATIBLE: CZ Scorpion EVO 3+

WARNING: DO NOT OVERTIGHTEN set screw when installing. Tighten only until end of set screw is flush with the nut. Failure to properly install will result in magazine not dropping freely.

Keep the look of your existing stock and buffer tube but be able to convert it to fixed! The Stock Stop is the most affordable, easiest, and quickest way to convert your collapsible stock into a fixed stock. The Stock Stop fills in all but one receiver extension hole. This ensures that the stock cannot be adjusted to another position.  Compatible with any aftermarket 6-position buffer tube or our 7-position Advanced Receiver Extensions, the Stock Stop requires no modification to the buffer tube-- simply cut the piece to fit, and it drops right in. No need to drill and pin your existing stock. Made out of high strength and abrasion resistant TPU, the stop is ensured to stay in place, and out of sight.

COMPATIBILITY: Mil-Spec 6 position stocks with the positions evenly spaced apart.

DISCLAIMER: This device is made to conform to the DOJ criteria but has not been approved.  If the Stock Block is used in conjunction with other features on the CA DOJ banned features list, the host system no longer constitutes a “featureless” build.  Please consult your local laws and regulations to ensure compliance.