Search results for 'HandguArd'

Strike Industries LINK attachment system takes the age old question Key-Mod vs. M-Lok and came up with the ultimate solution, a dual interface design compatible with both M-Lok and Key-Mod, same hardware with no need for additional parts. This Aluminum rail section allows the attachment of various M1913 Picatinny spec rail-mounted accessories such as vertical grips, lights, lasers,  etc. The Dual interface rail section also features beveled ends to reduce snagging and eliminate sharp corners and edges.  

The Strike Industries LINK Angled HandStop with Cable Management System® is a rearward angle setup for pull style grip options for better weapon manipulation control. This rail attachment assists in pulling the weapon into the shooters shoulder which aids in additional control and mitigating recoil. Textured front and rear finger areas for better grasp plus built-in front and rear barricade stop. The patented SI LINK system allows mounting onto both M-LOK and KeyMod compatible devices for a bigger variety of applications. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees, U-shape or Z-shape. Lightweight high-strength impact resistant custom blended SI Polymer Extreme material with a size and design to fit a wide variety of hands, the SI LINK Angled HandStop with Cable Management System® is an excellent way to increase shootability of your weapon.

COMPATIBILITY: M-LOK and KeyMod

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Stacked Angled Grip with Cable Management System® is a modular rail attachment that allows the user to adjust the preferred length when paired with the optional Strike Stacked Angled Grip Extension (sold separately). With the stackable Extension pieces, the shooter can apply different grip techniques to adapt to various scenarios or sized hands. The grip angle sits on the handguard at 86 degrees and is compatible with M-LOK slots. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, 90-degrees or in a U-shape. Designed with textured palm and finger areas with flat sides for better weapon manipulation control. The Strike Stacked Angled Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material attachment that gives the user modular (with optional Extension) adjustable length grip options for better weapon manipulation control.

COMPATIBILITY: M-LOK

WARNING: Strike Stacked Angled Grip end plate needs to be expanded to remove from Strike Stacked Angled Grip body but be careful not to expand too far in which it can snap and break.

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

DISCLAIMER: Always check with your state and local laws. We are not lawyers.

The Strike Stacked Angled Grip with Cable Management System® is a modular rail attachment that allows the user to adjust the preferred length when paired with the optional Strike Stacked Angled Grip Extension (sold separately). With the stackable Extension pieces, the shooter can apply different grip techniques to adapt to various scenarios or sized hands. The grip angle sits on the handguard at 86 degrees and is compatible with M-LOK slots. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, 90-degrees or in a U-shape. Designed with textured palm and finger areas with flat sides for better weapon manipulation control. The Strike Stacked Angled Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material attachment that gives the user modular (with optional Extension) adjustable length grip options for better weapon manipulation control.

COMPATIBILITY: M-LOK

WARNING: Strike Stacked Angled Grip end plate needs to be expanded to remove from Strike Stacked Angled Grip body but be careful not to expand too far in which it can snap and break.

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

DISCLAIMER: Always check with your state and local laws. We are not lawyers.