WELCOME TO MADBULL !

Search results for '4mm Ball Bearing'

Items 1 to 6 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction
  1. Strike Micro Threaded Comp - CIRCLE for Airsoft (14mm CCW) - Black

    Strike Micro Threaded Comp - CIRCLE for Airsoft (14mm CCW) - Black

    The CIRCLE edition pistol compensator from the Strike Micro Threaded Comp (SMTC) line can work with just about any size slide using a threaded barrel with 14mm CCW. This simple and sleek CIRCLE design is for those looking for a minimalist sized compensator that still redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing has typically seen a reduction average range (dependent on application) of 8-15% in felt recoil. The included O-ring (with spares) is used to help time and retain the SMTC CIRCLE comp. Originally designed for smaller compact, sub-compact and micro sized pistols, the SI styling of the CIRCLE maintains fitment with your existing holster or majority of holsters on the market. On full size or any size pistols, consider it as also a thread protector with added muzzle control. Made from 6061 T6, the Strike Micro Threaded Comp - CIRCLE is small and lightweight at only a total length of 16.3mm (0.64”) while redirecting gas for recoil reduction to keep you on target.

    Learn More
  2. Knight's Armament Airsoft Triple-Tap Compensator / Flash Hider (CCW / 14mm–)

    Knight's Armament Airsoft Triple-Tap Compensator / Flash Hider (CCW / 14mm–)

    Knight's Armament Airsoft Triple-Tap Compensator / Flash Hider (CCW / 14mm–) Learn More
  3. CO2 Adapter-XM Charger-XC04

    CO2 Adapter-XM Charger-XC04

    XM-CHARGER is special designed for CO2 powered gears.

    Problems you might have:
    (1)There is no CO2 output:
    The CO2 tank valve is not pushed by the XM-CHARGER's brass screw.
    Not all tank valves are built the same and you need to do with the height of the pin located at the center of the valve.
    You can also adjust the brass screw inside the XM-CHARGER. In this case, you need to use screw driver and counter-clockwise to turn the brass screw up.

    Learn More
  4. Strike Tactical Rubber Band - 34MM in BK (5-pack)

    Strike Tactical Rubber Band - 34MM in BK (5-pack)

    The Strike Industries Bang Band Mini gives you the ability to add additional grip to a pistol grip, magazine or any small sized object. The grooves and anti-slip texture gives you better handling and feeling of your weapon. The positive tactical feeling enhances your pistol grip and/or magazine with an additional gripping surface for your dominant and/or support hand. The 34mm (1.34”) diameter by 14.7mm (0.58”) wide Strike Bang Band Mini is strong and durable for you to also use in other applications when a standard rubber band just is not enough. Made of Nitrile Butadiene Rubber (NBR), it withstands heat up to 226° F. SI is constantly developing new parts and accessories to be a total systems provider for every aspect of your weapon.

    NOTES There is no cable management and not reversible like Strike Bang Band

    WARNING: COLOR VERSIONS OF BANG BAND MINI (RED, FDE, OD) MAY CHANGE WHEN STRETCHED DUE TO ELASTIC MATERIAL

    DISCLAIMER: Treat the Strike Bang Band like a traditional rubber band which can lose its elasticity over time as well as rip or tear. Not meant to be reusable for long periods of time.

    Learn More
  5. Noveske KX5 Dummy Compensator for Airsoft. 14mm CCW version

    Noveske KX5 Dummy Compensator for Airsoft. 14mm CCW version

    The licensed Noveske KX5 flash suppressor / blast director works as a sound amplification device for your Airsoft gun to amplify the muzzle report and throw it down range. Learn More
  6. Dual Folding Stock and Brace

    Dual Folding Stock and Brace

    NOTE:
    -Pressing buttons simultaneously will remove bar from hinge
    -Lubrication of hinge and button components needed for routine maintenance

    Package Contents:
    -x1 Strike Dual Folding Adapter (fully assembled with stabilizer)
    -x1 Stock buttpad for rifle or registered Short-Barrel Rifle (SBR)
    -x4 Rubber pad (various thickness) for Dual Folding Adapter indentation to adjust desired locking tension when fully deployed
    -x1 Torx Tool [T25]
    -x1 Warning card

    Product Features:
    -Preassembled as stabilizer and includes a separate stock rear piece for rifle or registered Short-Barrel Rifle (SBR)
    -Patented first-in-market Picatinny dual folding adapter with intuitive unfolding system
    -Folds left or right anytime without flipping or reconfiguring hinge
    -Adds [Stabilizer] 9.24" (234.64mm) or [Stock] 9.18” (233.14mm) to overall weapon length
    -Adds 1.02” (26.00mm) to overall weapon length in folded position
    -Positive lock in the folded position, included rubber pads for folding adapter indentation to adjust desired locking tension when fully deployed
    -Pull up on bar near hinge and back for quick deployment when folded
    -3-degree down tilt to help prevent interference with ejection port when folded to right side
    -Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs
    -Single rear QD [Stabilizer] and ambidextrous QD sling mounting points [Stock]
    -Rubber anti-slip buttpad [Stock]
    -Steel hinge with 6061-T6 Aluminum base, adapter & strut
    -Lightweight at under 10 ounces
    -Modular system with interchangeable parts sold separately (strut, cheek riser, stabilizer & more)

    (See additional compatibility list in PRODUCT SPEC tab)
    MOUNT COMPATIBILITY: 1913 Picatinny

     

    Learn More

Items 1 to 6 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction