Search results for 'ace'

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

Learn More

The Strike AirTag Holder keeps your Apple AirTag safely inside and securely. Using the AirTag, track the location of your weapon if lost, even if it’s just buried in the back of your safe. While traveling with your weapon or on your next hunt, use this AirTag holder to know where you stuff is at. Fully enclosed in the Strike Holder and securely locked in with the SI unique anti-theft set screw. Included is the security tool required for installation and removal of the set screw. This holder mounts directly to just about every 1913 Picatinny rail as long as there is enough space. Made from high-strength and lightweight polymer, The Strike AirTag Holder helps you keep track of your precious stuff.

COMPATIBILITY: 1913 Picatinny

WARNING: Depending on tolerances/width of Picatinny rail Strike AirTag Holder is mounted on, there can be a slight gap in the middle due to clamshell design.

NOTE: Apple AirTag not included

Learn More

Madbull has released their next generation Metal Bodies and is a perfect addition to their impressive line of high quality upgrade parts. The newest generation metal bodies are CNC machined from aluminum with officially licensed trademarks much like the older version but with new features. The new Madbull metal bodies have been redesigned to fit the needs of today’s airsoft player by having a shortened stock tube so you can run buffer tubes specifically made for lipo batteries. They also feature self retaining pins so the pins never have to leave the body to prevent misplacement or lost during combat. With updated style of upper receiver, it enables increased body security and reduces upper and lower receiver play. Much like the older version, the Madbull Ultimate Hop Up chamber is also included with the body. Learn More

Madbull has released their next generation Metal Bodies and is a perfect addition to their impressive line of high quality upgrade parts. The newest generation metal bodies are CNC machined from aluminum with officially licensed trademarks much like the older version but with new features. The new Madbull metal bodies have been redesigned to fit the needs of today’s airsoft player by having a shortened stock tube so you can run buffer tubes specifically made for lipo batteries. They also feature self retaining pins so the pins never have to leave the body to prevent misplacement or lost during combat. With updated style of upper receiver, it enables increased body security and reduces upper and lower receiver play. Much like the older version, the Madbull Ultimate Hop Up chamber is also included with the body. Learn More

The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. The 45-degree angle should get you out of the way of most LPVO scopes along with two mounting positions to pick from on the SI Multi-Optic Mount side. Easily place a MRDS alongside a LPVO with the low-profile SI-Ambush Picatinny rail mount that either sits flush with the top of the Pic rail or slightly below making it easier to sit under a scope or scope mount. The Strike Ambush 45 comes with a dual footprint mounting plate which has the SI Multi-Optic Mount on one side and the Aimpoint® Micro Standard footprint for T-1/T-2 compatible red dots on the other side making this a new innovative modular option for a diverse market. The SUS630 hardened stainless steel Picatinny rail mount is ambidextrous for either side. The 6061-T6 aluminum mounting plate can be flipped to select which MRDS but also oriented to work with the right or left side of the Pic rail. Fitment for one or fitment for almost all MRDS’ on the market, the Strike Ambush 45-Degree Optic Mount gives you a simple, compact and modular just about all-in-one solution.

MOUNT COMPATIBILITY: 1913 Picatinny

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-Aimpoint Micro Standard
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
*NOTE: Some specific red dots require screws provided by user listed in PRODUCT SPEC tab
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw

Learn More