Search results for 'madbull outer barrel 7.5'

It’s time to rethink what you really need a stock to do. It’s time to rethink what a stock can do. It’s time to reject the status quo, the compromises we all have taken for what is, rather than think about what can be. The AR as a compact platform, has always felt like an amalgamation of ad hoc fixes rather than a dedicated system of components designed from the ground up to work in harmony with the shooter. Once again, Strike Industries has the solution: the Pit stock system.

WARNING:
-The Strike Pit stock is only compatible with the Strike Industries 7 Position Advanced Receiver Extension! Not compatible with any other manufacturer's buffer tube. Sold separately.
-Not recommended for use while mortaring firearm to clear malfunctions.

Disclaimer: Due to numerous factors that take place during the anodization process, the color lines from batch to batch of a certain product may vary in shade. 

WARNING:
-Before every use, always check proper function of your QD mount and any wear and tear from use
-Always have your weapon in the SAFE position when not being fired
-Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy

The Strike Dual Folding Adapter – Cheek Riser is a drop-in direct mount optional cheek rest for the Strike Dual Folding Adapter bar. This gives you the ability to add an adjustable cheek rest for added comfort and accuracy with consistent cheek placement. This adjustable Cheek Riser gives you five (x5) position choices to pick the best use for each individual user; heights above top of bar: 10.25mm (0.40”) [low flat], 16.55mm (0.65”) [mid], 23.55mm (0.53”) [high flat], 20.46mm (0.81”) [low angled], 27.50mm (1.08”) [high angled]. Quickly swap heights with the triblade thumb screw designed for easy installation and removal without tools. Give yourself a good cheek weld and anchor point with the Strike Dual Folding Adapter – Cheek Riser for critical accuracy and consistency.

HEIGHTS ABOVE TOP OF BAR:
-LOW FLAT: 10.25mm (0.40”)
-MID: 16.55mm (0.65”)
-HIGH FLAT: 23.55mm (0.53”)
-LOW ANGLED: 20.46mm (0.81”)
-HIGH ANGLED: 27.50mm (1.08”)

COMPATIBILITY: Only with Strike Dual Folding Stock Adapter bar

OEM by J-TECH for JAG Precision, the Aegis IV is an exclusively produced and distributed, high quality plate carrier that is fully licensed by the United States Marine Corps. The plate carrier is made of heavy duty 1000 Denier Coyote Tan nylon and the material is made in USA. It is capable of holding standard front and rear SAPI & ESAPI as well as SIDE SAPI in the integral pockets for MILSIM / sports use. Special design and unique properties of the internal padding not only promotes ventilation and comfort but more importantly a significant reduction in impacts. 

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Dual Folding Adapter – Stock is a versatile and innovative patented system that offers unparalleled convenience and flexibility. With its intuitive folding mechanism, you can fold the adapter to either the left or right side without any flipping or reconfiguration, and the positive lock ensures it stays in place. Deployment is quick and effortless with just a simple pull up on the bar near the hinge. The 3-degree tilt angle helps prevent interference with your weapon's ejection port when folded to the right. This adapter fits directly onto a 1913 Picatinny interface with built-in locking lugs for secure attachment, and the included rear rubber buttpad ensures a comfortable shoulder weld for your rifle or SBR setup. Constructed with durable steel hinge and 6061-T6 Aluminum, the Strike Dual Folding Adapter - Stock is lightweight, yet tough. Plus, it's highly customizable with interchangeable parts like a cheek riser, different strut lengths, and other accessories (sold separately). Use it with most 1913 Picatinny rear ends, including the Strike AR Picatinny Stock Adapter, or any factory OEM weapon with a Picatinny rail. With the Strike Dual Folding Adapter – Stock, you get the ultimate modular folding adapter that weighs under 10 ounces.

RUBBER PAD NOTE:
-Watch this video: How do the rubber pads work? (click link here)
-Included rubber pads in various thicknesses are for the two (x2) indentations located inside the Dual Folding Adapter side that faces the bar. Unfold and insert the desired rubber pad thickness to adjust the desired locking tension when fully deployed.