Search results for 'bloc hop up madbull'

The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. The 45-degree angle should get you out of the way of most LPVO scopes along with two mounting positions to pick from on the SI Multi-Optic Mount side. Easily place a MRDS alongside a LPVO with the low-profile SI-Ambush Picatinny rail mount that either sits flush with the top of the Pic rail or slightly below making it easier to sit under a scope or scope mount. The Strike Ambush 45 comes with a dual footprint mounting plate which has the SI Multi-Optic Mount on one side and the Aimpoint® Micro Standard footprint for T-1/T-2 compatible red dots on the other side making this a new innovative modular option for a diverse market. The SUS630 hardened stainless steel Picatinny rail mount is ambidextrous for either side. The 6061-T6 aluminum mounting plate can be flipped to select which MRDS but also oriented to work with the right or left side of the Pic rail. Fitment for one or fitment for almost all MRDS’ on the market, the Strike Ambush 45-Degree Optic Mount gives you a simple, compact and modular just about all-in-one solution.

MOUNT COMPATIBILITY: 1913 Picatinny

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-Aimpoint Micro Standard
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
*NOTE: Some specific red dots require screws provided by user listed in PRODUCT SPEC tab
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw

Learn More

The Strike Handguard for KRISS Vector SDP adds more functionality and usability to the Vector platform with M-LOK attachments. This handguard mounts quickly and directly to all KRISS Vector lower receivers but is specifically designed for the SDP model with a 6.5” barrel. Add enhanced ergonomics and manipulation of your weapon with SI style. Many M-LOK or SI LINK accessories can be attached and mounted along the handguard at 3, 6, and 9 o'clock positions giving you more options that will transform the function and the look of your Vector. This Strike Handguard fits suppressors up to 1.90” (48.26mm) in diameter and is also designed to work with Vector CRB square or round barrel shrouds. Machined from 6061-T6 aluminum, this 1-pc free float handguard is designed to minimize weight and increase strength. The Strike Handguard for KRISS Vector SDP will complete the look and add functionality with a simple drop-in installation choice when it comes to enhancing and customizing your KRISS Vector in a limited aftermarket marketplace.

COMPATIBILITY:
-Fits suppressors up to 1.90” (48.26mm) in diameter
-Vector SDP/SBR w/ 6.5” barrel models
-Vector SDP/SBR w/ 5.5” barrel models using linear compensator, silencer or muzzle device with all ports past front of Strike handguard
-Vector CRB
-Vector 22 CRB
-Vector square or round barrel shrouds
NOT COMPATIBLE: Vector SDP/SBR w/ 5.5” barrel models when used with only barrel and no muzzle devices with ports past front of Strike handguard, linear compensator or silencer past front of Strike handguard.

WARNING: Specifically designed for the KRISS Vector SDP with 6.5” barrel models but will work with 5.5” barrel models using linear compensator, silencer or muzzle device with all ports past handguard for safe use. Designed to work with KRISS Vector SDP with 5.5” barrel models for the tuck look paired with a linear compensator, silencer or muzzle device with all ports past front of Strike handguard.

Learn More

The Strike Industries Quick Detach Sling Loop is the most revolutionary design for QD attachments to date. The new mechanism is even easier to remove than standard QD sling swivels. The user can still singlehandedly squeeze the mechanism for the simplest attachment and detachment. Instead of a push button that is tough to disengage, the patent-pending side to side mechanism allows for uninterrupted quick attach and detach while the sling is in use. Crafted from 17-4 Stainless Steel and after a quench polish quench process, the durability of the sling loop is greatly increased. The triangular option of the swivel loop allows a comfortable range of movement and rotation for paracord type slings or the more heavy-duty ParaClip from Magpul. Learn More

The innovative Daniel Defense AR15 Lite Rail 12.0 system gives the weapon system an uninterrupted upper rail platform and also allows the Armorer to install the rail system with simplified alignment to the upper receiver. Not only does this battle proven system provide features that no other rail system possesses, but it is also the lightest rail system available. Learn More

Keep the look of your existing stock and buffer tube but be able to convert it to fixed! The Stock Stop is the most affordable, easiest, and quickest way to convert your collapsible stock into a fixed stock. The Stock Stop fills in all but one receiver extension hole. This ensures that the stock cannot be adjusted to another position.  Compatible with any aftermarket 6-position buffer tube or our 7-position Advanced Receiver Extensions, the Stock Stop requires no modification to the buffer tube-- simply cut the piece to fit, and it drops right in. No need to drill and pin your existing stock. Made out of high strength and abrasion resistant TPU, the stop is ensured to stay in place, and out of sight.

COMPATIBILITY: Mil-Spec 6 position stocks with the positions evenly spaced apart.

DISCLAIMER: This device is made to conform to the DOJ criteria but has not been approved.  If the Stock Block is used in conjunction with other features on the CA DOJ banned features list, the host system no longer constitutes a “featureless” build.  Please consult your local laws and regulations to ensure compliance.

Learn More