WELCOME TO MADBULL !

Search results for 'HandguArd'

Items 13 to 18 of 28 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction
  1. Angled Vertical Grip with Cable Management - Long or Short (M-LOK)

    Angled Vertical Grip with Cable Management - Long or Short (M-LOK)

    The Strike Industries Angled Vertical Grip with Cable Management (M-LOK) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. Compared to the Short version, the Long version has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails, the Strike Industries Angled Vertical Grip with Cable Management (Long) gives the shooter control while handling or firing the weapon, added stability (Long) with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires.

    COMPATIBILITY: M-LOK

    DISCLAIMER:
    -Always check with your state and local laws. We are not lawyers.
    -LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

    Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

    Learn More
  2. Viper Carbine Length Handguard

    Viper Carbine Length Handguard

    The Strike Industries carbine length VIPER Handguard is a great upgrade to those looking for a solid, slim bottom drop-in handguard with aggressive styling!!! The VIPER Handguard, made of impact resistant nylon fiber-reinforced injection-molded polymer, features aggressive gripping options, top and bottom hand stops and the new M-Lok rail system with plenty of rail estate to mount your accessories! Learn More
  3. NOVESKE Licensed NSR-11 HANDGUARD in GY

    NOVESKE Licensed NSR-11 HANDGUARD in GY

    Madbull is pleased to announce the release of ultra light-weight, ber ergonomic Noveske NSR handguard for the airsoft market! The NSR was designed with the goal of being the lightest and smallest free floating forend option to the M16 family of weapons. The KeyMod system offers a mounting platform for a variety of (future) accessories and components. The days of the Picatinny Rail (MIL-STD-1913) are numbered. The future of the direct mountable accessory is here and now. The KeyMod self-contained components/mounting hardware index and V-block onto the platform, achieving a secured and accurate hold to the system, while separate lugs take the recoil force off the fasteners. The pass through attachment method eliminates the need for loose screws and backing plates that can easily be lost, or difficult to install. Another advantage of the KeyMod system over the 1913 system is the direct attach eliminates the need for the 1913 system as a "middle man" thereby reducing weight and accessory off-set from the center of the handguard. The Noveske NSR is the next evolution in rail section technology, dont get left behind! Learn More
  4. Strike AR Cable Management Rail Covers - Short in Black (4pcs/set)

    Strike AR Cable Management Rail Covers - Short in Black (4pcs/set)

    The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

    COMPATIBILITY: M-LOK

    NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

    Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

    Learn More
  5. Strike Stacked Angled Grip with Cable Management System®

    Strike Stacked Angled Grip with Cable Management System®

    The Strike Stacked Angled Grip with Cable Management System® is a modular rail attachment that allows the user to adjust the preferred length when paired with the optional Strike Stacked Angled Grip Extension (sold separately). With the stackable Extension pieces, the shooter can apply different grip techniques to adapt to various scenarios or sized hands. The grip angle sits on the handguard at 86 degrees and is compatible with M-LOK slots. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, 90-degrees or in a U-shape. Designed with textured palm and finger areas with flat sides for better weapon manipulation control. The Strike Stacked Angled Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material attachment that gives the user modular (with optional Extension) adjustable length grip options for better weapon manipulation control.

    COMPATIBILITY: M-LOK

    WARNING: Strike Stacked Angled Grip end plate needs to be expanded to remove from Strike Stacked Angled Grip body but be careful not to expand too far in which it can snap and break.

    NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

    Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

    DISCLAIMER: Always check with your state and local laws. We are not lawyers.

    Learn More
  6. Strike Tactical Rubber Band in BK (5-pack)

    Strike Tactical Rubber Band in BK (5-pack)

    The Strike Bang Band secures weapon light/laser cables to help organize your gear while adding an anti-slip surface on your handguard. You can flip the Strike Bang Band so the cable channel guide can be used on the outside or the inside making it reversible and adaptable for your specific setup and needs. The cable channel fits into M-LOK compatible slots so you can keep your handguard as slim and sleek as possible. The grooves and anti-slip texture is on both sides of the band so you don’t have to pick which is the best surface. The positive tactical feeling enhances your handguard and/or magazine with an additional gripping surface for your support hand. Organize your cables with some SI style. The 2” diameter by 0.60” wide Strike Bang Band is strong and durable for you to also use in other applications when a standard rubber band just is not enough. Use the Strike Bang Band to add more tension to your buttstock latch or S rolling sling to keep it out of the way for vehicle use or neat storage in safe. Made of Nitrile Butadiene Rubber (NBR), it withstands heat up to 226° F. The Strike Bang Band is part of the growing line of Strike Industries Cable Management System® products that offers alternatives in cable organization and management. SI is constantly developing new parts and accessories to be a total systems provider for every aspect of your weapon.

    DISCLAIMER: Treat the Strike Bang Band like a traditional rubber band which can lose its elasticity over time as well as rip or tear. Not meant to be reusable for long periods of time.

    Learn More

Items 13 to 18 of 28 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction