Search results for 'oss'

The Strike Bang Band secures weapon light/laser cables to help organize your gear while adding an anti-slip surface on your handguard. You can flip the Strike Bang Band so the cable channel guide can be used on the outside or the inside making it reversible and adaptable for your specific setup and needs. The cable channel fits into M-LOK compatible slots so you can keep your handguard as slim and sleek as possible. The grooves and anti-slip texture is on both sides of the band so you don’t have to pick which is the best surface. The positive tactical feeling enhances your handguard and/or magazine with an additional gripping surface for your support hand. Organize your cables with some SI style. The 2” diameter by 0.60” wide Strike Bang Band is strong and durable for you to also use in other applications when a standard rubber band just is not enough. Use the Strike Bang Band to add more tension to your buttstock latch or S rolling sling to keep it out of the way for vehicle use or neat storage in safe. Made of Nitrile Butadiene Rubber (NBR), it withstands heat up to 226° F. The Strike Bang Band is part of the growing line of Strike Industries Cable Management System® products that offers alternatives in cable organization and management. SI is constantly developing new parts and accessories to be a total systems provider for every aspect of your weapon.

DISCLAIMER: Treat the Strike Bang Band like a traditional rubber band which can lose its elasticity over time as well as rip or tear. Not meant to be reusable for long periods of time.

Kit includes: 4" pistol length Rail, 7" outer barrel, and 153mm tight bore barrel for easy installation. The innovative Daniel Defense AR15 Lite Rail 4.0 system gives the weapon system an uninterrupted upper rail platform and also allows the Armorer to install the rail system with simplified alignment to the upper receiver. Not only does this battle proven system provide features that no other rail system possesses, but it is also the lightest rail system available.

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Multidirectional Picatinny Rail Cover with Cable Management utilizes the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories while adding a positive tactile feeling. Also protect your Pic rail from damage and protect your hand or thumb from sharp Pic rail edges. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, this simple and cost-effective solution for messy wires gives you a way to route and/or contain loose wire up to 3.5mm (0.14”) diameter inside the cover cavity. Cables can be routed alongside the Pic rail, alongside, U-shape, Z-shape or across to the other side. Designed to be a low-profile (9.43mm (0.37”) height) and used in any orientation, this cover protects your hand or thumb and has a textured surface which gives the shooter more control while handling or firing of the weapon. Made of durable and lightweight SI PolyFlex material, the cover only uses two (x2) Pic rail sections making it a compact and quick upgrade for the shooters hands while organizing and routing cables just about any way you want on a Pic rail. Available in a 6-pack, the Strike Multidirectional Picatinny Rail Cover with Cable Management will accessorize multiple Picatinny rails or weapons to not only add more weapon control but look good with wire management that is a quick installation and removal.

COMPATIBILITY: 1913 Picatinny

WARNING: 90-degree cable route will damage most wires because of sharp Picatinny rail edges

The Strike Industries LINK Angled HandStop with Cable Management System® is a rearward angle setup for pull style grip options for better weapon manipulation control. This rail attachment assists in pulling the weapon into the shooters shoulder which aids in additional control and mitigating recoil. Textured front and rear finger areas for better grasp plus built-in front and rear barricade stop. The patented SI LINK system allows mounting onto both M-LOK and KeyMod compatible devices for a bigger variety of applications. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees, U-shape or Z-shape. Lightweight high-strength impact resistant custom blended SI Polymer Extreme material with a size and design to fit a wide variety of hands, the SI LINK Angled HandStop with Cable Management System® is an excellent way to increase shootability of your weapon.

COMPATIBILITY: M-LOK and KeyMod

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws