Search results for 'mk12 rail'

This is the Strike Single Folding Stabilizing Adapter.

You may already be familiar with our Strike FSA Dual, a modular folding arm solution that can fold to the left and the right with interchangeable stock and stabilizer end pieces.

While the new Stabilizer Single Folder utilizes the same arm and stabilizer end piece as our Dual Folder, it has a new strengthened hinge made of steel instead of aluminum, making it extremely robust. The fitment is also perfect with little to no play when extended and folded. This folder only folds to a single side but can do so anytime without any reconfiguration or use of a button. 

When the hinge is installed to fold left, users will experience similar muscle memory if they've already used our Dual Folder - the action is the same to fold. Simply lift upward on the arm and fold to the left.

In its folded position, the arm can be forcefully thrown back into the extended position for quick deployment with no risk of damage to the hinge thanks to its new beefed-up design. The Stabilizer edition of our Single folder has only one QD point located at the 6 o'clock facing position for attaching your favorite sling.

The Strike Single Folding Adapter is compatible with any weapon platform with a rear-facing 1913 Picatinny rail. To attach, simply tighten the hex screw in the hinge adapter onto a pic rail. Look no further for a compact, lightweight, and reliable single folder! (On its own, the Single folder weighs 10.75oz.)

Whether it's for our SMC Bravo Chassis, a pistol caliber carbine like the CZ Scorpion, or a PDW style AR-15, the Strike Single Folder is perfect for them all. Get yours today!

NOTE:
Lubrication of hinge needed for routine maintenance. 

TORQUE:
It may vary depending on if you are attaching this to an aluminum or polymer picatinny rail. 
-For the picatinny mount screw on aluminum rails do not exceed 40 in/lbs (4.5Nm)
-For the picatinny mount screw on polymer rails do not exceed 35 in/lbs (4.0Nm)

This is the Strike Single Folding Stock

(Dealers, please note that this product is an RSR exclusive and currently can only be purchased from RSR Group.)

You may already be familiar with our Strike FSA Dual, a modular folding arm solution that can fold to the left and the right with interchangeable stock and stabilizer end pieces. While the new Stock Single Folder still utilizes the same arm and stock end piece as our Dual Folder it has a strengthened hinge made of steel, instead of aluminum, making it extremely robust. The fitment is also perfect with little to no play when extended and folded. This folder only folds to a single side but can do so at any time without reconfiguring or using a button. 

When the hinge is installed to fold left, users will experience similar muscle memory if they've already used our Dual Folder - the action is the same to fold. Simply lift upward on the arm and fold to the left. In its folded position, the arm can be forcefully thrown back into the extended position for quick deployment with no risk of damage to the hinge thanks to its new beefed-up design. Since you're running the Stock edition of our Single folder, be sure to also pick up our adjustable FSA Cheek Riser to make your shooting experience more comfortable.

At the 3 and 9 o'clock positions there are two QD points located on the stock end piece for attaching your favorite sling. The Strike Single Folding Adapter is compatible with any weapon platform that has a rear-facing 1913 Picatinny rail. To attach, tighten the hex screw in the hinge adapter onto a pic rail. Look no further for a compact, lightweight, and reliable single folder! (On its own, the Single folder is 11oz. With a Cheek Riser it weighs 12.41oz)

Whether it's for our SMC Bravo Chassis, a pistol caliber carbine like the CZ Scorpion, or a PDW style AR-15, the Strike Single Folder is perfect for them all. Get yours today!

NOTE:
Lubrication of hinge needed for routine maintenance. 

TORQUE:
It may vary depending on if you are attaching this to an aluminum or polymer picatinny rail. 
-For the picatinny mount screw on aluminum rails do not exceed 40 in/lbs (4.5Nm)
-For the picatinny mount screw on polymer rails do not exceed 35 in/lbs (4.0Nm)

The MK1 series, developed by Primary Weapons Systems, is a significant product improvement for the M4/M16-type carbines and rifles. Utilizing our proven long stroke piston system, the MK1 series greatly reduces fouling in the action of the weapon making it as reliable as the AK47 that it was designed after. The MK1 series has been used in Iraq and Afghanistan, and has gained wide popularity with security personnel, law enforcement and civilians alike. The origins of the MK1 series began with the fascination in the simplicity and reliability of the AK47 combined with a deep-rooted appreciation for the ergonomics of the M4/M16 platform. Having a significant understanding of the deficiencies in the direct gas impingement operating system found on conventional M4/M16-style weapons, PWS developed the MK1 series with the professional operator in mind. Significant product improvements have been made over both the direct impingement operating system and previous offerings of piston-driven operating systems. Our product improvements have addressed reliability and performance issues as well as reduced carrier tilt, cam pin wear and carrier bounce. An innovative hand guard system utilizes a proprietary non-free float system that allows the end user or unit armorer to replace individual rails as needed without removing the barrel, barrel nut or even other rails. This system allows the user to attach numerous picatinny rail mounted devices such as sights, lights, and laser aiming devices. The PWS proprietary operating system utilizes an operating rod that is attached to the carrier and a floating head piston that is attached to the operating rod. The MK1 series is built to be a true combat carbine. With no unnecessary gas adjustments and only one moving assembly, this is the most rugged, simple and versatile piston operating system available.

The MK1 series, developed by Primary Weapons Systems, is a significant product improvement for the M4/M16-type carbines and rifles. Utilizing our proven long stroke piston system, the MK1 series greatly reduces fouling in the action of the weapon making it as reliable as the AK47 that it was designed after. The MK1 series has been used in Iraq and Afghanistan, and has gained wide popularity with security personnel, law enforcement and civilians alike. The origins of the MK1 series began with the fascination in the simplicity and reliability of the AK47 combined with a deep-rooted appreciation for the ergonomics of the M4/M16 platform. Having a significant understanding of the deficiencies in the direct gas impingement operating system found on conventional M4/M16-style weapons, PWS developed the MK1 series with the professional operator in mind. Significant product improvements have been made over both the direct impingement operating system and previous offerings of piston-driven operating systems. Our product improvements have addressed reliability and performance issues as well as reduced carrier tilt, cam pin wear and carrier bounce. An innovative hand guard system utilizes a proprietary non-free float system that allows the end user or unit armorer to replace individual rails as needed without removing the barrel, barrel nut or even other rails. This system allows the user to attach numerous picatinny rail mounted devices such as sights, lights, and laser aiming devices. The PWS proprietary operating system utilizes an operating rod that is attached to the carrier and a floating head piston that is attached to the operating rod. The MK1 series is built to be a true combat carbine. With no unnecessary gas adjustments and only one moving assembly, this is the most rugged, simple and versatile piston operating system available.