Search results for 'G36 rail'

The Strike Industries Bikini Hand Stop (BHS) gives the shooter increased ergonomics and control of the weapon. The hand stop is made from durable and lightweight polymer compatible with M-LOK rails. The BHS is bi-directional and can be mounted in either direction and includes two (2) per pack. The low-profile design with all rounded corners or smooth edges help to avoid snags. The SI Bikini Hand Stop gives the shooter a quick indexing point for faster weapon deployment which can be used in a "push" or "pull" style grip. You can mount the hand stop more forward on the handguard as it's also designed to go in between your index and middle fingers. The more forward position on the handguard can help get the BHS out of the way when in a kneeling or prone position as well as other accessories and equipment. Also you can mount at 3 or 9 o'clock positions to use as a thumb ledge for applying downward pressure to mitigate recoil. Getting its name from the obvious sexy shape, the Strike Industries Bikini Hand Stop rail attachment gives you increased accuracy and stability at a super budget friendly price while barely adding any weight.

COMPATIBILITY: M-LOK

DISCLAIMER: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. 

The Strike Handguard for KRISS Vector SDP adds more functionality and usability to the Vector platform with M-LOK attachments. This handguard mounts quickly and directly to all KRISS Vector lower receivers but is specifically designed for the SDP model with a 6.5” barrel. Add enhanced ergonomics and manipulation of your weapon with SI style. Many M-LOK or SI LINK accessories can be attached and mounted along the handguard at 3, 6, and 9 o'clock positions giving you more options that will transform the function and the look of your Vector. This Strike Handguard fits suppressors up to 1.90” (48.26mm) in diameter and is also designed to work with Vector CRB square or round barrel shrouds. Machined from 6061-T6 aluminum, this 1-pc free float handguard is designed to minimize weight and increase strength. The Strike Handguard for KRISS Vector SDP will complete the look and add functionality with a simple drop-in installation choice when it comes to enhancing and customizing your KRISS Vector in a limited aftermarket marketplace.

COMPATIBILITY:
-Fits suppressors up to 1.90” (48.26mm) in diameter
-Vector SDP/SBR w/ 6.5” barrel models
-Vector SDP/SBR w/ 5.5” barrel models using linear compensator, silencer or muzzle device with all ports past front of Strike handguard
-Vector CRB
-Vector 22 CRB
-Vector square or round barrel shrouds
NOT COMPATIBLE: Vector SDP/SBR w/ 5.5” barrel models when used with only barrel and no muzzle devices with ports past front of Strike handguard, linear compensator or silencer past front of Strike handguard.

WARNING: Specifically designed for the KRISS Vector SDP with 6.5” barrel models but will work with 5.5” barrel models using linear compensator, silencer or muzzle device with all ports past handguard for safe use. Designed to work with KRISS Vector SDP with 5.5” barrel models for the tuck look paired with a linear compensator, silencer or muzzle device with all ports past front of Strike handguard.