WELCOME TO MADBULL !

Strike Polymer Backup Sights


Quick Overview


Product Features:

-Built-in backup sights when flipped down for quick target acquisition

-Low-profile and low snag design

-Tool-less adjustments of windage and elevation

-Quick sliding dual aperture rear sight (large: 4.70mm(0.19")/small: 1.75mm(0.07"))

-Manual deployment so you don’t accidently deploy when you don’t need

-Front sight can be painted to users color preference

-Budget friendly cost effective option

-Lightweight and durable custom blended SI Polymer Extreme material




COMPATIBILITY: 1913 Picatinny




Torque: Do not exceed 10 in/lbs (1.13 nM) for mount screw

Strike Polymer Backup Sights

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

 

Package Contents:
-x1 SPBUS front sight (fully assembled)
-x1 SPBUS rear sight (full assembled)
-x1 Hex tool [2.0mm]
-x1 Loctite® Threadlocker Blue 243®

The Strike Polymer Backup Sights (SPBUS) is a low-profile affordable sighting system that is designed for the AR platform and has bonus built-in sights when flipped down. No time to flip up the sights, you have backup sights on your backup sights. The SPBUS sights are made with lightweight and durable SI Polymer Extreme material with steel mounting tab and insert that can handle any wear and tear you throw at it without any major issues. As long as you’ve got a Picatinny rail, you will have these SPBUS mounted in minutes. Both sights are capable of flipping down nice and low so you don’t have to worry about them being in your way when they’re not in use or snag on any gear. The SPBUS does not have an internal spring so you don’t accidently deploy the sights when you don’t need them. Since the SPBUS sights are slightly taller than standard A2 sights (2.3mm/0.09" taller), the SPBUS is designed and optimized to have both sights paired together and not with other sights. To zero the sights or make any adjustments, the rear sight has an easy-to-use knob for adjusting windage while the front sight elevation is easily and quickly adjusted without tools. The rear SPBUS has dual apertures at 4.70mm(0.19") for longer eye relief, low light and faster target acquisition; and 1.75mm(0.07") for shorter eye relief and greater accuracy. Quickly slide the rear sight up and down to change to the aperture you need. If you need these as a primary or want them as a backup sight, the Strike Polymer Backup Sights (SPBUS) is a low-profile durable multi-function option that has tool-less adjustments paired at an affordable price.

COMPATIBILITY: 1913 Picatinny

Torque: Do not exceed 10 in/lbs (1.13 nM) for mount screw

-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov