AS REAL AS IT GETS

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24”) height) and used in any orientation, the contoured covers add ergonomic textured surfaces to your handguard. Made of durable and lightweight polymer, the covers are also a quick and affordable upgrade to mitigate any heat transfer between the barrel and the shooters hands while organizing and routing cables just about any way you want. Available in a Long version that is 79.80mm (3.14”) in length that comes in a 2-pack or a Short version that is 39.90mm (1.57”) in length that comes in a 4-pack. Get one length or both and always have the Strike Industries M-LOK Cable Management Covers you need to get a grip and manage your cables at the same time.

COMPATIBILITY: M-LOK

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

The Strike Multidirectional Picatinny Rail Cover with Cable Management utilizes the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories while adding a positive tactile feeling. Also protect your Pic rail from damage and protect your hand or thumb from sharp Pic rail edges. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, this simple and cost-effective solution for messy wires gives you a way to route and/or contain loose wire up to 3.5mm (0.14”) diameter inside the cover cavity. Cables can be routed alongside the Pic rail, alongside, U-shape, Z-shape or across to the other side. Designed to be a low-profile (9.43mm (0.37”) height) and used in any orientation, this cover protects your hand or thumb and has a textured surface which gives the shooter more control while handling or firing of the weapon. Made of durable and lightweight SI PolyFlex material, the cover only uses two (x2) Pic rail sections making it a compact and quick upgrade for the shooters hands while organizing and routing cables just about any way you want on a Pic rail. Available in a 6-pack, the Strike Multidirectional Picatinny Rail Cover with Cable Management will accessorize multiple Picatinny rails or weapons to not only add more weapon control but look good with wire management that is a quick installation and removal.

COMPATIBILITY: 1913 Picatinny

WARNING: 90-degree cable route will damage most wires because of sharp Picatinny rail edges

Impress the next person who asks to borrow you lighter. The Strike Mag Lighter Cover for BIC® Mini gives you not only a carry and/or storage solution for a BIC® Mini Lighter, but also a fun novelty item for gun lovers. Modeled after the unique Strike Industries pistol magazine design, this SI lighter cover manually extends and retracts with a slide mechanism. The baseplate of the lighter cover gives you a pocket clip for those who need a lighter often or need a way to neatly organize a usefully tool. The BIC® Mini Lighter is a great tool to always have on hand (even for non-smokers) but with the mini size, the lighter can be lost or hard to find. Lighters are not only for smokers. A lighter is a great tool to have in an EveryDay Carry (EDC) kit, bag or vehicle. A lighter can be handy when you need to burn off the end of a strand of thread from clothing or rope ends. Of course if you ever need a fire for an emergency situation as well as lighting stoves or fire pits when camping, a lighter can be a better choice rather than matches which are not always water resistant. Give a gun lover a fun novelty gift or yourself an upgrade to a useful BIC® Mini Lighter with the Strike Mag Lighter Cover for BIC® Mini.

COMPATIBILITY: BIC® Mini Lighter

WARNING: This is only a novelty lighter cover and not to be used to imitate a real pistol magazine

NOTE:
-Due to tolerances, some BIC® Mini Lighter bodies will require the use of included SI decal for a tighter fitment
-**This is an add on item only. If you order this alone, you will be responsible for USPS First Class Shipping**

The Strike JellyFish Cover for Trijicon SRO® provides a transparent all-weather protection. Maintain the clean, crisp red dot and unobstructed large field of view of the SRO® (Specialized Reflex Optic) design. Help protect your gear with this snug rigid fit flexible Thermoplastic Polyurethane (TPU) construction material. The JellyFish cover has an open design access to the illumination controls. Quick and easy installation that can be rapidly removed for zeroing or when the battery needs replacement. Field tested for effectiveness, the Strike JellyFish Cover for Trijicon SRO® ensures the legendary Trijicon® durability on and off the range.

COMPATIBILITY: Trijicon SRO® (all models)

NOTE:
-Cover may not properly fit with rear sight depending on distance between back of Trijicon SRO® placement to rear iron sight. Modification to cover maybe required to fit with use of rear sight.
-Cover does not protect Trijicon SRO® lens