» Strike Industries
-
Angled Vertical Grip with Cable Management - Long or Short (Picatinny)
The Strike Industries Angled Vertical Grip with Cable Management (Picatinny) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. The patent pending SI Cable Management System® (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the grip cavity. The cuts at the top middle of the grip allow for easier pressure switch attachment. On both the Short and Long version there has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version is a low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with 1913 Picatinny rails, the Strike Industries Angled Vertical Grip with Cable Management gives the shooter control while handling or firing the weapon, added stability with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. Learn More -
Angled Vertical Grip with Cable Management - Long or Short (M-LOK)
The Strike Industries Angled Vertical Grip with Cable Management (M-LOK) is engineered like no other grip on the market. The grip angle sits on the handguard at 86 degrees. Patent pending SI cable management function enables you to organize and store excess wire from your weapon light or any other cabled accessories in multiple configurations. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the cable management feature will offer you a place to route and/or contain loose wire inside the grip cavity. The side cuts at the top middle of the grip allow for easier pressure switch attachment. Compared to the Short version, the Long version has an added built-in stability feature when you place the L-shaped bottom onto a table edge/corner or as a barricade stop, giving you another way to get back on target faster downrange. The Short version can be mounted in either direction for your own preferred and personal setup and is low-profile form helps to minimize snags. The forward angle provides more of a natural wrist angle and increased rigidity of forearm. Designed with textured palm and finger areas with flat sides for positive handling and easier manipulation of the firearm. Made from durable and lightweight polymer compatible with M-LOK rails, the Strike Industries Angled Vertical Grip with Cable Management (Long) gives the shooter control while handling or firing the weapon, added stability (Long) with table/edge corner or as a barricade stop and an innovative way to ensure total cable management. No messy wires. Learn More -
Strike Gear: Cable Management System® Sleeve
The Strike Gear® Cable Management System® Sleeve offers a way for you to attach your switch or pressure pad and secure wires alongside the handguard of your weapon. Just like the rest of the SI Cable Management System® (CMS) line of products, keep your gear organized and personalized for each user. The SI CMS Sleeve is made of two polyester (x2) elastic webbing loops, the main loop sized 145mm (5.71”) in diameter to stretch over your handguard and smaller loop sized 8mm (0.32”) height x 21mm (083”) base width for a switch/pressure pad. If you do not have a mount or desire your switch/pressure pad to be in a specific place, the CMS Sleeve has a small elastic loop for you to secure and place almost exactly where you want it. The small loop has been sized to fit majority of the switches/pressure pads on the market. The main loop is sized to fit SI handguards and just about any handguard on the market. Both the main and small loop allow you to organize, tuck or run loose wire. No messy wires. Add a little protection against sharp rail slot edges. The Strike Gear® Cable Management System® Sleeve gives a customized way to attach a switch or pressure pad and manage your cables in a cost-effective way. Developed to continue the line of Strike Gear® soft goods accessories to help you organize. Learn More -
LINK Angled HandStop with Cable Management System®
The Strike Industries LINK Angled HandStop with Cable Management System® is a rearward angle setup for pull style grip options for better weapon manipulation control. This rail attachment assists in pulling the weapon into the shooters shoulder which aids in additional control and mitigating recoil. Textured front and rear finger areas for better grasp plus built-in front and rear barricade stop. The patented SI LINK system allows mounting onto both M-LOK and KeyMod compatible devices for a bigger variety of applications. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees, U-shape or Z-shape. Lightweight high-strength impact resistant custom blended SI Polymer Extreme material with a size and design to fit a wide variety of hands, the SI LINK Angled HandStop with Cable Management System® is an excellent way to increase shootability of your weapon. Learn More -
AR Overmolded Enhanced Pistol Grip
The Strike Industries AR Overmolded Enhanced Pistol Grip comes with a rubberized texture in three (3) different angles to suit any shooter's needs; 15, 20 and 25 degrees. Just like the Strike Industries Enhanced Pistol Grip, but now available with a rubberized overmolded surface which improves control of your weapon. The grip is more streamlined and tapered where the webbing of the hand goes to allow more range of movement of the firing hand when accessing the controls. It has enough width in the palm area to maximize comfort during extended use. Each grip features a comfortable beaver tail and secure storage underneath with an included rubber end cap. Get a solid and cozy hold of your gun now with the Strike Industries AR Overmolded Enhanced Pistol Grip. Learn More -
Strike Tactical Rubber Band in BK (5-pack)
The Strike Bang Band secures weapon light/laser cables to help organize your gear while adding an anti-slip surface on your handguard. You can flip the Strike Bang Band so the cable channel guide can be used on the outside or the inside making it reversible and adaptable for your specific setup and needs. The cable channel fits into M-LOK compatible slots so you can keep your handguard as slim and sleek as possible. The grooves and anti-slip texture is on both sides of the band so you don’t have to pick which is the best surface. The positive tactical feeling enhances your handguard and/or magazine with an additional gripping surface for your support hand. Organize your cables with some SI style. The 2” diameter by 0.60” wide Strike Bang Band is strong and durable for you to also use in other applications when a standard rubber band just is not enough. Use the Strike Bang Band to add more tension to your buttstock latch or S rolling sling to keep it out of the way for vehicle use or neat storage in safe. Made of Nitrile Butadiene Rubber (NBR), it withstands heat up to 226° F. The Strike Bang Band is part of the growing line of Strike Industries Cable Management System® products that offers alternatives in cable organization and management. SI is constantly developing new parts and accessories to be a total systems provider for every aspect of your weapon. Learn More
