» Strike Industries

The Strike Industries Magazine Release for the CZ Scorpion EVO is a lightweight, high-strength polymer solution that enables the user to depress the magazine release utilizing only one hand. Whereas the original design requires two hands to disengage a magazine, the Strike Industries Magazine Release has added fins on both sides of the trigger guard that allow the shooter to use their shooting finger to hit the release, freeing the other hand of that burden and allowing for overall faster reloads. Quicker reloads lead to more rounds on target in a shorter amount of time.

The Strike K1 Knife is an everyday knife made for everyday use. The thumb hole in the blade makes it easy to open one-handed. Two (x2) Jimping areas on the back of the blade to provide additional grip and control for different grip styles. This ambidextrous knife features a reversible pocket clip for your preferred hand which orientates the knife at a tip-up position in your pocket. Handles made of high-strength impact resistant custom blended SI Polymer Extreme material, the handles give you enhanced geometry with anti-slip textures. The handle style offers a hand-filling grip and excellent tactile orientation, while still making sure the knife is slim and easy to carry everyday. Keeping with the theme of an Everyday Carry (EDC) knife, the Strike K1 Knife incorporates a patented bladeless tape cutter fin. Safely cut open most tape used to seal boxes without the blade. Never leave home without the Strike K1 Knife as part of your EDC kit for just about any outdoor or indoor uses.

--Knife specifications located in PRODUCT SPEC tab--

WARNING: Do not use any thread-locking fluid on any screws

The Strike Stacked Angled Grip with Cable Management System® is a modular rail attachment that allows the user to adjust the preferred length when paired with the optional Strike Stacked Angled Grip Extension (sold separately). With the stackable Extension pieces, the shooter can apply different grip techniques to adapt to various scenarios or sized hands. The grip angle sits on the handguard at 86 degrees and is compatible with M-LOK slots. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, 90-degrees or in a U-shape. Designed with textured palm and finger areas with flat sides for better weapon manipulation control. The Strike Stacked Angled Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material attachment that gives the user modular (with optional Extension) adjustable length grip options for better weapon manipulation control.

COMPATIBILITY: M-LOK

WARNING: Strike Stacked Angled Grip end plate needs to be expanded to remove from Strike Stacked Angled Grip body but be careful not to expand too far in which it can snap and break.

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

DISCLAIMER: Always check with your state and local laws. We are not lawyers.

Target and strengthen your index fingers with the Strike Clicker. Ambidextrous for either your right or left hand, this pocket sized index (or thumb) finger trainer has an average pull weight of 2.0 lbs. 2.0 oz. For disciplines that can benefit from a strong index finger, individually training may be critical. You may be surprised how relatively weak your finger may be once you’ve tried clicking numerous times in a row. The Strike Clicker can be used as an index/thumb finger rehabilitation or prevention tool with constant use. Say hello to the itchy finger fidget device as a tension release or fidget device. Have some fun building as assembly is required but annoy everyone around you with hours of clicking fun. A simple and fun item on a keychain or lanyard as one of your EveryDay Carry (EDC) items. Say hello to the itchy finger fidget device. A bonus use of the Strike Clicker can be as a dog training clicker for positive reinforcement.

NOTE:
-Assembly required
-Average pull weight is from 15 pulls using Lyman 7832248 Electronic Digital Trigger Pull Gauge

WARNING: This is only a novelty index finger trainer and not to be used to imitate a real weapon

Save $30.00 when buying both as a combo deal: Strike ASM & ASM Ring Cap Multi-Optic Mount System Combo

SCOPE CAP MOUNT COMPATIBILITY: Only with Strike Industries Adjustable Scope Mount (ASM)

The Strike ASM Ring Cap Multi-Optic Mount System is a drop-in add-on for the SI Adjustable Scope Mount (ASM) that gives you almost endless mounting possibilities for just about all Mini/Micro Red Dot Sight (MRDS) footprints on the market or Picatinny rail for mounting IR devices, ranging equipment or any Picatinny based accessories. When you want to enhance your Strike Industries ASM by running a dual optic setup and have a close distance MRDS paired with a Low Power Variable Optic (LPVO) scope, this Strike ASM Ring Cap Mount is an accessory that does not force you to pick only one red dot you have to stick with forever. The included multi-optic plate or Picatinny rail can be mounted at 12 o'clock or 45-degree right or left positions to customize exactly for the specific user. With fitment for almost all MRDS’ on the market, the Strike ASM Ring Cap Multi-Optic Mount System gives you a simple and modular just about all-in-one solution to upgrade the functionality of the Strike Industries Adjustable Scope Mount (ASM).

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Strike ASM Ring Cap Mount screws

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests