WELCOME TO MADBULL !

Strike Ambush 45-Degree Optic Mount


Availability: 在庫あり

商品の概要


The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. The 45-degree angle should get you out of the way of most LPVO scopes along with two mounting positions to pick from on the SI Multi-Optic Mount side. Easily place a MRDS alongside a LPVO with the low-profile SI-Ambush Picatinny rail mount that either sits flush with the top of the Pic rail or slightly below making it easier to sit under a scope or scope mount. The Strike Ambush 45 comes with a dual footprint mounting plate which has the SI Multi-Optic Mount on one side and the Aimpoint® Micro Standard footprint for T-1/T-2 compatible red dots on the other side making this a new innovative modular option for a diverse market. The SUS630 hardened stainless steel Picatinny rail mount is ambidextrous for either side. The 6061-T6 aluminum mounting plate can be flipped to select which MRDS but also oriented to work with the right or left side of the Pic rail. Fitment for one or fitment for almost all MRDS’ on the market, the Strike Ambush 45-Degree Optic Mount gives you a simple, compact and modular just about all-in-one solution.




MOUNT COMPATIBILITY: 1913 Picatinny




(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)

RED DOT COMPATIBILITY:

-Aimpoint Micro Standard

-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS

-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS

*NOTE: Some specific red dots require screws provided by user listed in PRODUCT SPEC tab

NOT COMPATIBLE:

-SIG SAUER ROMEO1, ROMEO1PRO




WARNING:

-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating

-Be careful and use your best judgment on which hardware to use for your specific setup

-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests




Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw

Strike Ambush 45-Degree Optic Mount

ダブルクリックすると大きな画像を表示します。

ズームアウト
ズームイン

もっと見る

詳細

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

Package Contents:
-x1 Strike Ambush 45-degree mount (fully assembled)
-x1 Strike double sided optic plate
-x2 Screw for optic plate to mount [M3x10mm T10 Flat]
-x4 Screw for Aimpoint Micro Standard [M3x6mm T10 Rounded]
-x2 Screw [M3x6mm T10 Flat]
-x2 Screw [M3x8mm T10 Flat]
-x4 Screw [M3x8mm T10 Rounded]
-x2 Screw [M3x10mm T10 Rounded]
-x2 Screw [M3x10.5mm T10 Flat]
-x3 Large mounting post
-x5 Small mounting post
-x1 Torx tool [T10]
-x1 Torx tool [T20]
-x1 Loctite® Threadlocker Blue 243®
-x1 Warning card

Product Features:
-45-degree offset
-Dual footprint mounting plate with SI Multi-Optic Mount and Aimpoint® Micro Standard
-Ambidextrous for either side
-Two mounting positions to pick from on SI Multi-Optic Mount side
-SI-AMBUSH low-profile mounting system
-Lightweight and high-strength
-SUS630 hardened stainless steel Picatinny rail mount
-Mounting plate machined from 6061-T6 aluminum

MOUNT COMPATIBILITY: 1913 Picatinny

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-Aimpoint Micro Standard
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
*NOTE: Some specific red dots require screws provided by user listed in PRODUCT SPEC tab
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw

DISCLAIMER: "Aimpoint" is a federally registered trademarks of Aimpoint Inc. and are one of many trademarks owned by Aimpoint Inc. Neither Strike Industries Inc nor this site are affiliated in any manner with, or otherwise endorsed by, Aimpoint Inc. The use of "Aimpoint" on this page is merely to advertise the sale of Aimpoint parts, or components. For additional genuine Aimpoint Inc and parts visit www.aimpoint.us.

-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov