Search results for '6.03MM STEEL BULL TIGHTBO'

Pyramid angled RIS adapter. Use the vertical grip of your choice and put it into a 17 degree angle for enhanced ergonomics. Why buy an additional grip when you already have one? Angle it forward to simulate the Romanian AK handguard or angle it back to add a 2nd front pistol grip similar to a Mk43. When installed back the grip is angled 17 degrees and the same as an AR15 grip. Combine it with our Dura grip in CQB configuration for the ultimate angled vertical grip. 

Learn More

Product Features:
-Built-in backup sights when flipped down for quick target acquisition
-Low-profile and low snag design
-Tool-less adjustments of windage and elevation
-Quick sliding dual aperture rear sight (large: 4.70mm(0.19")/small: 1.75mm(0.07"))
-Steel mounting tab and insert for added strength
-Manual deployment so you don’t accidently deploy when you don’t need
-Front sight can be painted to users color preference
-Budget friendly cost effective option
-Lightweight and durable custom blended SI Polymer Extreme material

COMPATIBILITY: 1913 Picatinny

Torque: Do not exceed 10 in/lbs (1.13 nM) for mount screw

Learn More

Madbull has imported the AKRR2 from the innovative Strike Industries! Finally, now there’s a light-weight solution to optic mounting on an AK. The AKRR2 will transition over from real steel on to certain airsoft rifles. The S.I. AKRR2 is designed with three major components; Main base, 45 degree side rail, and extended rail. The main base serves as the attachment point to the rifle, a reference aiming gap, and base for mounting the side rail and extended rail. It has three hex socket screws to adjust the angle of the base. The 45 degree side Picatinny rail can be positioned ambidextrously and is best suited to pair with a micro red dot sight. The extended Picatinny rail can be used for EO tech or Aimpoint reflex sights and some long range magnified scopes. The AKRR2 major appeal is its level of adaptability. Whatever the shooter’s needs may be, the AKRR2 is designed to meet every challenge.

Learn More

The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. The 45-degree angle should get you out of the way of most LPVO scopes along with two mounting positions to pick from on the SI Multi-Optic Mount side. Easily place a MRDS alongside a LPVO with the low-profile SI-Ambush Picatinny rail mount that either sits flush with the top of the Pic rail or slightly below making it easier to sit under a scope or scope mount. The Strike Ambush 45 comes with a dual footprint mounting plate which has the SI Multi-Optic Mount on one side and the Aimpoint® Micro Standard footprint for T-1/T-2 compatible red dots on the other side making this a new innovative modular option for a diverse market. The SUS630 hardened stainless steel Picatinny rail mount is ambidextrous for either side. The 6061-T6 aluminum mounting plate can be flipped to select which MRDS but also oriented to work with the right or left side of the Pic rail. Fitment for one or fitment for almost all MRDS’ on the market, the Strike Ambush 45-Degree Optic Mount gives you a simple, compact and modular just about all-in-one solution.

MOUNT COMPATIBILITY: 1913 Picatinny

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-Aimpoint Micro Standard
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
*NOTE: Some specific red dots require screws provided by user listed in PRODUCT SPEC tab
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw

Learn More

The Strike Industries Quick Detach Sling Loop is the most revolutionary design for QD attachments to date. With the ability to remove the QD with a single hand the user can easily squeeze the mechanism for the simplest attachment and detachment. Instead of a push button that is tough to disenage, the patent pending side to side mechanism allows for uniterrupted quick attach and detach while the sling is in use. Crafted from 17-4 Stainless Steel and after a quench polish quench process, the durability of the sling loop is greatly increased. The enhanced geometry of the sling loop allows the strap to never pinch, bite, or roll around the interior of the loop allowing for the maximum mobility and comfort in any tactical or training situation. Learn More