Search results for 'butt stocks and extender'

Whether you get to work by jumping out of perfectly good aircraft, wading up a hostile beach or jammed in the back of minivan with 6 big sweaty dudes you want your gear to be ready but not in the way. RACKminus is half the weight of a loaded M4 magazine, half the thickness of a dime and over 4 times as durable as air textured nylon: the lightest, thinnest, strongest, simplest modular chest rig on the market. RACKminus is made from hydrophobic ULTRAcomp™ so it gains minimal weight when wet, dries in seconds, and resists fungal and bacterial growth so you chafe and stink less. Its MOLLEminus mesh lined shoulder straps are free breathing, MOLLE compatible and provide routing for communications wires, hydration tubes or antennas. Two 1 inch buckles placed 7.5" on center apart allow compatibility with Velocity, Mayflower, Crye, and First Spear profile armor carriers and with any MOLLE vest by using National Molding's Molle Tee Mounts (not included). RACKminus can also be mounted to most MOLLE armor carriers using two female repair buckles and two tee mounts.

The Strike Multidirectional Picatinny Rail Cover with Cable Management utilizes the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories while adding a positive tactile feeling. Also protect your Pic rail from damage and protect your hand or thumb from sharp Pic rail edges. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, this simple and cost-effective solution for messy wires gives you a way to route and/or contain loose wire up to 3.5mm (0.14”) diameter inside the cover cavity. Cables can be routed alongside the Pic rail, alongside, U-shape, Z-shape or across to the other side. Designed to be a low-profile (9.43mm (0.37”) height) and used in any orientation, this cover protects your hand or thumb and has a textured surface which gives the shooter more control while handling or firing of the weapon. Made of durable and lightweight SI PolyFlex material, the cover only uses two (x2) Pic rail sections making it a compact and quick upgrade for the shooters hands while organizing and routing cables just about any way you want on a Pic rail. Available in a 6-pack, the Strike Multidirectional Picatinny Rail Cover with Cable Management will accessorize multiple Picatinny rails or weapons to not only add more weapon control but look good with wire management that is a quick installation and removal.

COMPATIBILITY: 1913 Picatinny

WARNING: 90-degree cable route will damage most wires because of sharp Picatinny rail edges

The Strike iPhone 14 Pro Case is meticulously designed to enhance your smartphone experience. This case offers a secure grip, thanks to its left and right serrations that prevent slips and drops. With embedded MagSafe-compatible magnetic ring, you'll enjoy hassle-free cordless charging and mounting. The built-in lens guard provides protection against drops and impacts, while the cleverly positioned index and middle finger bumps keep your camera lens free from smudges and obstructions. To top it all off, the shock-absorbing flexible TPU material ensures added durability, making this Strike iPhone 14 Pro Case a perfect companion for your iPhone.

COMPATIBILITY: Apple iPhone 14 Pro 6.1"
NOT COMPATIBLE: Apple iPhone 14 Pro Max 6.7"

The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control.

COMPATIBILITY: M-LOK and KeyMod

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

DISCLAIMER: Always check with your state and local laws. We are not lawyers.

Over a dozen configurations!

Modern handguard grips have come a long way. They enhance the shooters skills through better recoil management and ease of indexing repeatability for speed.  But one grip style may not be suited for everybody, and sometimes rail space is limited so just a hand-stop can fit. But what if you didn't have to settle for just onegrip style?

Introducing the Strike Industries Hand Stop Kit. Gone are the days of having to keep extra handstops, foregrips, and other grip accessories laying around. Including 3 sections that can work together or as standalone attachments, there are over half a dozen ways to configure the Link hand-stop kit for different shooting styles.The three sections are made from durable, reinforced, & heat-resistant polymer. Each section uses a single modified T-nut that has been tried and tested for superior lock-up. The HSK is directly mounted to either M-Lok slots or Keymod holes without the need for adapters in between, resulting in a highly ergonomic and secure lock-up. 

Don’t compromise­–overcome, with the Link Handstop Kit.   

COMPATIBILITY: M-LOK and KeyMod Rails
NOT COMPATIBLE: HAYL Rail M-LOK Handguard for Benelli M4

DISCLAIMER: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws