Search results for 'pri'

The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. The 45-degree angle should get you out of the way of most LPVO scopes along with two mounting positions to pick from on the SI Multi-Optic Mount side. Easily place a MRDS alongside a LPVO with the low-profile SI-Ambush Picatinny rail mount that either sits flush with the top of the Pic rail or slightly below making it easier to sit under a scope or scope mount. The Strike Ambush 45 comes with a dual footprint mounting plate which has the SI Multi-Optic Mount on one side and the Aimpoint® Micro Standard footprint for T-1/T-2 compatible red dots on the other side making this a new innovative modular option for a diverse market. The SUS630 hardened stainless steel Picatinny rail mount is ambidextrous for either side. The 6061-T6 aluminum mounting plate can be flipped to select which MRDS but also oriented to work with the right or left side of the Pic rail. Fitment for one or fitment for almost all MRDS’ on the market, the Strike Ambush 45-Degree Optic Mount gives you a simple, compact and modular just about all-in-one solution.

MOUNT COMPATIBILITY: 1913 Picatinny

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-Aimpoint Micro Standard
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
*NOTE: Some specific red dots require screws provided by user listed in PRODUCT SPEC tab
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw

The Strike Industries Bikini Hand Stop (BHS) gives the shooter increased ergonomics and control of the weapon. The hand stop is made from durable and lightweight polymer compatible with M-LOK rails. The BHS is bi-directional and can be mounted in either direction and includes two (2) per pack. The low-profile design with all rounded corners or smooth edges help to avoid snags. The SI Bikini Hand Stop gives the shooter a quick indexing point for faster weapon deployment which can be used in a "push" or "pull" style grip. You can mount the hand stop more forward on the handguard as it's also designed to go in between your index and middle fingers. The more forward position on the handguard can help get the BHS out of the way when in a kneeling or prone position as well as other accessories and equipment. Also you can mount at 3 or 9 o'clock positions to use as a thumb ledge for applying downward pressure to mitigate recoil. Getting its name from the obvious sexy shape, the Strike Industries Bikini Hand Stop rail attachment gives you increased accuracy and stability at a super budget friendly price while barely adding any weight.

COMPATIBILITY: M-LOK

DISCLAIMER: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

Product Features:
-Built-in backup sights when flipped down for quick target acquisition
-Low-profile and low snag design
-Tool-less adjustments of windage and elevation
-Quick sliding dual aperture rear sight (large: 4.70mm(0.19")/small: 1.75mm(0.07"))
-Steel mounting tab and insert for added strength
-Manual deployment so you don’t accidently deploy when you don’t need
-Front sight can be painted to users color preference
-Budget friendly cost effective option
-Lightweight and durable custom blended SI Polymer Extreme material

COMPATIBILITY: 1913 Picatinny

Torque: Do not exceed 10 in/lbs (1.13 nM) for mount screw

The Strike Industries Magazine Release for the CZ Scorpion EVO is a lightweight, high-strength polymer solution that enables the user to depress the magazine release utilizing only one hand. Whereas the original design requires two hands to disengage a magazine, the Strike Industries Magazine Release has added fins on both sides of the trigger guard that allow the shooter to use their shooting finger to hit the release, freeing the other hand of that burden and allowing for overall faster reloads. Quicker reloads lead to more rounds on target in a shorter amount of time.

Save $30.00 when buying both as a combo deal: Strike ASM & ASM Ring Cap Multi-Optic Mount System Combo

SCOPE CAP MOUNT COMPATIBILITY: Only with Strike Industries Adjustable Scope Mount (ASM)

The Strike ASM Ring Cap Multi-Optic Mount System is a drop-in add-on for the SI Adjustable Scope Mount (ASM) that gives you almost endless mounting possibilities for just about all Mini/Micro Red Dot Sight (MRDS) footprints on the market or Picatinny rail for mounting IR devices, ranging equipment or any Picatinny based accessories. When you want to enhance your Strike Industries ASM by running a dual optic setup and have a close distance MRDS paired with a Low Power Variable Optic (LPVO) scope, this Strike ASM Ring Cap Mount is an accessory that does not force you to pick only one red dot you have to stick with forever. The included multi-optic plate or Picatinny rail can be mounted at 12 o'clock or 45-degree right or left positions to customize exactly for the specific user. With fitment for almost all MRDS’ on the market, the Strike ASM Ring Cap Multi-Optic Mount System gives you a simple and modular just about all-in-one solution to upgrade the functionality of the Strike Industries Adjustable Scope Mount (ASM).

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Strike ASM Ring Cap Mount screws

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests