Search results for 'free float rail'

NOTE:
-Pressing buttons simultaneously will remove bar from hinge
-Lubrication of hinge and button components needed for routine maintenance

Package Contents:
-x1 Strike Dual Folding Adapter (fully assembled with stabilizer)
-x1 Stock buttpad for rifle or registered Short-Barrel Rifle (SBR)
-x4 Rubber pad (various thickness) for Dual Folding Adapter indentation to adjust desired locking tension when fully deployed
-x1 Torx Tool [T25]
-x1 Warning card

Product Features:
-Preassembled as stabilizer and includes a separate stock rear piece for rifle or registered Short-Barrel Rifle (SBR)
-Patented first-in-market Picatinny dual folding adapter with intuitive unfolding system
-Folds left or right anytime without flipping or reconfiguring hinge
-Adds [Stabilizer] 9.24" (234.64mm) or [Stock] 9.18” (233.14mm) to overall weapon length
-Adds 1.02” (26.00mm) to overall weapon length in folded position
-Positive lock in the folded position, included rubber pads for folding adapter indentation to adjust desired locking tension when fully deployed
-Pull up on bar near hinge and back for quick deployment when folded
-3-degree down tilt to help prevent interference with ejection port when folded to right side
-Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs
-Single rear QD [Stabilizer] and ambidextrous QD sling mounting points [Stock]
-Rubber anti-slip buttpad [Stock]
-Steel hinge with 6061-T6 Aluminum base, adapter & strut
-Lightweight at under 10 ounces
-Modular system with interchangeable parts sold separately (strut, cheek riser, stabilizer & more)

(See additional compatibility list in PRODUCT SPEC tab)
MOUNT COMPATIBILITY: 1913 Picatinny

The Strike Stacked Angled Grip with Cable Management System® is a modular rail attachment that allows the user to adjust the preferred length when paired with the optional Strike Stacked Angled Grip Extension (sold separately). With the stackable Extension pieces, the shooter can apply different grip techniques to adapt to various scenarios or sized hands. The grip angle sits on the handguard at 86 degrees and is compatible with M-LOK slots. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, 90-degrees or in a U-shape. Designed with textured palm and finger areas with flat sides for better weapon manipulation control. The Strike Stacked Angled Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material attachment that gives the user modular (with optional Extension) adjustable length grip options for better weapon manipulation control.

COMPATIBILITY: M-LOK

WARNING: Strike Stacked Angled Grip end plate needs to be expanded to remove from Strike Stacked Angled Grip body but be careful not to expand too far in which it can snap and break.

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

DISCLAIMER: Always check with your state and local laws. We are not lawyers.

The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. 

Product Features:
-Built-in backup sights when flipped down for quick target acquisition
-Low-profile and low snag design
-Tool-less adjustments of windage and elevation
-Quick sliding dual aperture rear sight (large: 4.70mm(0.19")/small: 1.75mm(0.07"))
-Steel mounting tab and insert for added strength
-Manual deployment so you don’t accidently deploy when you don’t need
-Front sight can be painted to users color preference
-Budget friendly cost effective option
-Lightweight and durable custom blended SI Polymer Extreme material

COMPATIBILITY: 1913 Picatinny

Torque: Do not exceed 10 in/lbs (1.13 nM) for mount screw

The Strike Stacked Angled Grip with Cable Management System® is a modular rail attachment that allows the user to adjust the preferred length when paired with the optional Strike Stacked Angled Grip Extension (sold separately). With the stackable Extension pieces, the shooter can apply different grip techniques to adapt to various scenarios or sized hands. The grip angle sits on the handguard at 86 degrees and is compatible with M-LOK slots. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, 90-degrees or in a U-shape. Designed with textured palm and finger areas with flat sides for better weapon manipulation control. The Strike Stacked Angled Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material attachment that gives the user modular (with optional Extension) adjustable length grip options for better weapon manipulation control.

COMPATIBILITY: M-LOK

WARNING: Strike Stacked Angled Grip end plate needs to be expanded to remove from Strike Stacked Angled Grip body but be careful not to expand too far in which it can snap and break.

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

DISCLAIMER: Always check with your state and local laws. We are not lawyers.