Search results for 'aegis 2 body armor'
-
2pcs LANCER L5 AWM Hi-Cap Magazine in BK (340rds). Project of G&P/Madbull/Socomgear. MSRP=$40
2pcs LANCER L5 AWM Hi-Cap Magazine in BK (340rds). Project of G&P/Madbull/Socomgear. MSRP=$40 Learn More -
Strike Polymer Backup Sights
Product Features:
-Built-in backup sights when flipped down for quick target acquisition
-Low-profile and low snag design
-Tool-less adjustments of windage and elevation
-Quick sliding dual aperture rear sight (large: 4.70mm(0.19")/small: 1.75mm(0.07"))
-Steel mounting tab and insert for added strength
-Manual deployment so you don’t accidently deploy when you don’t need
-Front sight can be painted to users color preference
-Budget friendly cost effective option
-Lightweight and durable custom blended SI Polymer Extreme material
COMPATIBILITY: 1913 Picatinny
Torque: Do not exceed 10 in/lbs (1.13 nM) for mount screw
Learn More -
Strike Industries Ambush Sling Loop
The Strike Industries Ambush low profile sling loop is the lowest profile sling loop designed for the MIL-STD-1913 rail. Made of solid steel, its unique locking bar design system allows for it to be light weight and durable. Because the Ambush sits flat in between the rails, it will not interfere with your sights and fit neatly under longer optics when mounted towards the middle of the rifle. The dual purpose loop and swivel sling attachments allows the user to choose which mount they would like to use. Learn More -
Link Rail Section 7 Slots-QD featured - Patent Pending - Black
Strike Industries LINK attachment system takes the age old question Key-Mod vs. M-Lok and came up with the ultimate solution, a dual interface design compatible with both M-Lok and Key-Mod, same hardware with no need for additional parts. This Aluminum rail section allows the attachment of various M1913 Picatinny spec rail-mounted accessories such as vertical grips, lights, lasers, etc. The Dual interface rail section also features beveled ends to reduce snagging and eliminate sharp corners and edges.
Learn More -
NOVESKE Licensed NSR-11 HANDGUARD in GY
Madbull is pleased to announce the release of ultra light-weight, ber ergonomic Noveske NSR handguard for the airsoft market! The NSR was designed with the goal of being the lightest and smallest free floating forend option to the M16 family of weapons. The KeyMod system offers a mounting platform for a variety of (future) accessories and components. The days of the Picatinny Rail (MIL-STD-1913) are numbered. The future of the direct mountable accessory is here and now. The KeyMod self-contained components/mounting hardware index and V-block onto the platform, achieving a secured and accurate hold to the system, while separate lugs take the recoil force off the fasteners. The pass through attachment method eliminates the need for loose screws and backing plates that can easily be lost, or difficult to install. Another advantage of the KeyMod system over the 1913 system is the direct attach eliminates the need for the 1913 system as a "middle man" thereby reducing weight and accessory off-set from the center of the handguard. The Noveske NSR is the next evolution in rail section technology, dont get left behind! Learn More -
Strike ASM Ring Cap Multi-Optic Mount System
Save $30.00 when buying both as a combo deal: Strike ASM & ASM Ring Cap Multi-Optic Mount System Combo
SCOPE CAP MOUNT COMPATIBILITY: Only with Strike Industries Adjustable Scope Mount (ASM)
The Strike ASM Ring Cap Multi-Optic Mount System is a drop-in add-on for the SI Adjustable Scope Mount (ASM) that gives you almost endless mounting possibilities for just about all Mini/Micro Red Dot Sight (MRDS) footprints on the market or Picatinny rail for mounting IR devices, ranging equipment or any Picatinny based accessories. When you want to enhance your Strike Industries ASM by running a dual optic setup and have a close distance MRDS paired with a Low Power Variable Optic (LPVO) scope, this Strike ASM Ring Cap Mount is an accessory that does not force you to pick only one red dot you have to stick with forever. The included multi-optic plate or Picatinny rail can be mounted at 12 o'clock or 45-degree right or left positions to customize exactly for the specific user. With fitment for almost all MRDS’ on the market, the Strike ASM Ring Cap Multi-Optic Mount System gives you a simple and modular just about all-in-one solution to upgrade the functionality of the Strike Industries Adjustable Scope Mount (ASM).
(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PROTorque: Do not exceed 15 in/lbs (1.69 nM) for the Strike ASM Ring Cap Mount screws
WARNING:
Learn More
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests
