» S.I 製品

The Strike Ambush 45-Degree Optic Mount gives you a modular dual mounting plate design which covers just about all mainstream red dots on the market. When you want to run a dual optic setup and have a close distance Mini/Micro Red Dot Sight (MRDS) with a Low Power Variable Optic (LPVO) scope, this 45-degree optic mount is a low-profile and high-strength accessory without forcing you to pick only one red dot you have to pair it up with. The 45-degree angle should get you out of the way of most LPVO scopes along with two mounting positions to pick from on the SI Multi-Optic Mount side. Easily place a MRDS alongside a LPVO with the low-profile SI-Ambush Picatinny rail mount that either sits flush with the top of the Pic rail or slightly below making it easier to sit under a scope or scope mount. The Strike Ambush 45 comes with a dual footprint mounting plate which has the SI Multi-Optic Mount on one side and the Aimpoint® Micro Standard footprint for T-1/T-2 compatible red dots on the other side making this a new innovative modular option for a diverse market. The SUS630 hardened stainless steel Picatinny rail mount is ambidextrous for either side. The 6061-T6 aluminum mounting plate can be flipped to select which MRDS but also oriented to work with the right or left side of the Pic rail. Fitment for one or fitment for almost all MRDS’ on the market, the Strike Ambush 45-Degree Optic Mount gives you a simple, compact and modular just about all-in-one solution.

MOUNT COMPATIBILITY: 1913 Picatinny

(See individually listed red dot compatibility and suggested hardware to use in PRODUCT SPEC tab)
RED DOT COMPATIBILITY:
-Aimpoint Micro Standard
-C-MORE, DELTAPOINT PRO, DOCTER/NOBLEX, & RMR STANDARDS
-SHIELD STANDARD: SHIELD FOOTPRINT USING ONLY HOUSING REAR POSTS
*NOTE: Some specific red dots require screws provided by user listed in PRODUCT SPEC tab
NOT COMPATIBLE:
-SIG SAUER ROMEO1, ROMEO1PRO

WARNING:
-When using screws provided in the package, there is always a chance of hardware marring your optic housing finish/coating
-Be careful and use your best judgment on which hardware to use for your specific setup
-All installations should only be done by a certified professional gunsmith and properly tested to pass all safe and function tests

Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screw

The Strike Industries LINK Cobra Fore Grip with Cable Management is the evolution of the original SI Cobra Tactical Fore Grip which was developed for the shooter to use different grip techniques and allow the user to have a secure and comfortable grip in any situation or position. Designed to offer a barricade stop functionality with ridged face which prevents any sliding during shooting when braced against a table or wall. This version of the Cobra Fore Grip utilizes our patented SI LINK system which allows mounting onto both M-LOK and KeyMod compatible devices. The uniqueness of this handguard accessory does not just stop with the attachment. Also included is the patent pending SI Cable Management System® (CMS) function which enables you to organize and store excess wire from your weapon light or any other cabled accessories. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. Shooters from all walks of life and different size hands can use the SI Cobra Fore Grip without worrying if the grip is too big or the angle would be too aggressive that it would strain your hand. The Strike Industries LINK Cobra Fore Grip with Cable Management is a lightweight high-strength impact resistant custom blended SI Polymer Extreme material that gives multiple ergonomic grip options for better weapon manipulation control.

COMPATIBILITY: M-LOK and KeyMod

NOTE: LINK screws and nuts provided are not manufacturer by Strike Industries. Please make routine checks that the screws and nuts are secure as part of the preventive maintenance of the firearm.

Torque: Do not exceed 20 in/lbs (2.26 nM) for the LINK screws

DISCLAIMER: Always check with your state and local laws. We are not lawyers.

The Strike Industries Angled Quick Detach (AQD) and Flat Quick Detach (FQD) for CZ Scorpion EVO allows for proper sling attachment to a QD socket that directly replaces the factory CZ swivel sling mount. Designed to fit into the dovetail cuts located on the barrel trunnion, the AQD/FQD is ambidextrous and can be used on either side of the CZ Scorpion. Move the handguard forward enough to slide the factory mount off and simply slide the AQD/FQD into the dovetail for an easy installation. Angled at 115 degrees (AQD) which allows for easier ergonomic placement and accessibility. The QD is a 360° free swivel socket that is made from lightweight 6061-T6 aluminum and is bead blasted hard anodized. The Strike Industries Angled/Flat Quick Detach for CZ Scorpion EVO assists in pairing your QD sling in a harmonious position against your body or secures the sling as a shooting aid.

COMPATIBILITY: all CZ Scorpion EVO except Micro w/ Folding Brace
NOT COMPATIBLE: CZ Scorpion EVO Micro w/ Folding Brace

WARNING:
-Before every use, always check proper function of your QD mount and any wear and tear from use
-Always have your weapon in the SAFE position when not being fired
-Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy

The Strike Industries Angled Quick Detach (AQD) for CZ Scorpion EVO allows for proper sling attachment to a QD socket that directly replaces the factory CZ swivel sling mount. Designed to fit into the dovetail cuts located on the barrel trunnion, the AQD is ambidextrous and can be used on either side of the CZ Scorpion. Move the handguard forward enough to slide the factory mount off and simply slide the AQD into the dovetail for an easy installation. Angled at 115 degrees which allows for easier ergonomic placement and accessibility. The QD is a 360° free swivel socket that is made from lightweight 6061-T6 aluminum and is bead blasted hard anodized. The Strike Industries Angled Quick Detach for CZ Scorpion EVO assists in pairing your QD sling in a harmonious position against your body or secures the sling as a shooting aid.

COMPATIBILITY: all CZ Scorpion EVO except Micro w/ Folding Brace
NOT COMPATIBLE: CZ Scorpion EVO Micro w/ Folding Brace

**[AQD] CLEARANCE/SALE ITEMS ARE FINAL SALE. STRIKE INDUSTRIES WILL ONLY REVIEW AND OFFER WARRANTY REPLACEMENTS FROM MANUFACTURER DEFECTS.**