Search results for 'MK18 9.5 Inch Daniel Defe'
-
Magwell for CZ Scorpion EVO
The Strike Industries Magwell for CZ Scorpion EVO is a flared design specifically for Scorpion EVO pistols and carbines to provide easier magazine insertion for fast reliable reloading while adding SI styling. The benefit of adding a funnel-like magwell to help prevent the dreaded reload bobble outweighs the added material of this lightweight SI Magwell. With the addition of an increased radial edge in front of receiver, this magwell aids in improving grip support for the offhand. This magwell is made of high-strength impact resistant custom blended SI Polymer Extreme material. Add consistency and cut fractions of seconds off your reloads now with the Strike Industries Magwell for CZ Scorpion EVO. A perfect pairing with the SI Mag Release For CZ Scorpion EVO.
COMPATIBILITY: All CZ Scorpion EVO models (except 3+)
NOT COMPATIBLE: CZ Scorpion EVO 3+
WARNING: DO NOT OVERTIGHTEN set screw when installing. Tighten only until end of set screw is flush with the nut. Failure to properly install will result in magazine not dropping freely.
Learn More -
Carbine Length Handguard - Black
The Strike Industries carbine length Handguard is a great upgrade to those looking for a solid, slim bottom drop-in handguard with aggressive styling!!! The Handguard, made of impact resistant nylon fiber-reinforced injection-molded polymer, features aggressive gripping options, top and bottom hand stops and the new M-Lok rail system with plenty of real estate to mount your accessories!
Learn More -
Quick Detach For CZ Scorpion EVO - Angled or Flat
The Strike Industries Angled Quick Detach (AQD) and Flat Quick Detach (FQD) for CZ Scorpion EVO allows for proper sling attachment to a QD socket that directly replaces the factory CZ swivel sling mount. Designed to fit into the dovetail cuts located on the barrel trunnion, the AQD/FQD is ambidextrous and can be used on either side of the CZ Scorpion. Move the handguard forward enough to slide the factory mount off and simply slide the AQD/FQD into the dovetail for an easy installation. Angled at 115 degrees (AQD) which allows for easier ergonomic placement and accessibility. The QD is a 360° free swivel socket that is made from lightweight 6061-T6 aluminum and is bead blasted hard anodized. The Strike Industries Angled/Flat Quick Detach for CZ Scorpion EVO assists in pairing your QD sling in a harmonious position against your body or secures the sling as a shooting aid.
COMPATIBILITY: all CZ Scorpion EVO except Micro w/ Folding Brace
NOT COMPATIBLE: CZ Scorpion EVO Micro w/ Folding BraceWARNING:
Learn More
-Before every use, always check proper function of your QD mount and any wear and tear from use
-Always have your weapon in the SAFE position when not being fired
-Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy -
Angled Quick Detach For CZ Scorpion EVO
The Strike Industries Angled Quick Detach (AQD) for CZ Scorpion EVO allows for proper sling attachment to a QD socket that directly replaces the factory CZ swivel sling mount. Designed to fit into the dovetail cuts located on the barrel trunnion, the AQD is ambidextrous and can be used on either side of the CZ Scorpion. Move the handguard forward enough to slide the factory mount off and simply slide the AQD into the dovetail for an easy installation. Angled at 115 degrees which allows for easier ergonomic placement and accessibility. The QD is a 360° free swivel socket that is made from lightweight 6061-T6 aluminum and is bead blasted hard anodized. The Strike Industries Angled Quick Detach for CZ Scorpion EVO assists in pairing your QD sling in a harmonious position against your body or secures the sling as a shooting aid.
COMPATIBILITY: all CZ Scorpion EVO except Micro w/ Folding Brace
NOT COMPATIBLE: CZ Scorpion EVO Micro w/ Folding Brace**[AQD] CLEARANCE/SALE ITEMS ARE FINAL SALE. STRIKE INDUSTRIES WILL ONLY REVIEW AND OFFER WARRANTY REPLACEMENTS FROM MANUFACTURER DEFECTS.**
Learn More -
USMC Aegis IV Outer Shell Plate Carrier
OEM by J-TECH for JAG Precision, the Aegis IV is an exclusively produced and distributed, high quality plate carrier that is fully licensed by the United States Marine Corps. The plate carrier is made of heavy duty 1000 Denier Coyote Tan nylon and the material is made in USA. It is capable of holding standard front and rear SAPI & ESAPI as well as SIDE SAPI in the integral pockets for MILSIM / sports use. Special design and unique properties of the internal padding not only promotes ventilation and comfort but more importantly a significant reduction in impacts.
Learn More -
AR Stock Stop
Keep the look of your existing stock and buffer tube but be able to convert it to fixed! The Stock Stop is the most affordable, easiest, and quickest way to convert your collapsible stock into a fixed stock. The Stock Stop fills in all but one receiver extension hole. This ensures that the stock cannot be adjusted to another position. Compatible with any aftermarket 6-position buffer tube or our 7-position Advanced Receiver Extensions, the Stock Stop requires no modification to the buffer tube-- simply cut the piece to fit, and it drops right in. No need to drill and pin your existing stock. Made out of high strength and abrasion resistant TPU, the stop is ensured to stay in place, and out of sight.
COMPATIBILITY: Mil-Spec 6 position stocks with the positions evenly spaced apart.
DISCLAIMER: This device is made to conform to the DOJ criteria but has not been approved. If the Stock Block is used in conjunction with other features on the CA DOJ banned features list, the host system no longer constitutes a “featureless” build. Please consult your local laws and regulations to ensure compliance.
Learn More
